Articles


The best and brightest 2016 shows include NFMT 2016, AIHce 2016, ASSE

Looking Ahead to AIHce, Safety 2016, VPPPA, and More

The best and brightest 2016 shows include NFMT 2016, which takes place in March 2016 in Baltimore, followed by AIHce 2016, ASSE's Safety 2016, NFPA's Conference & Expo VPPPA's national conference, WEFTEC 2016, and the 2016 National Safety Congress & Expo.

Get Ready for Spring Storms, NOAA Advises

The agency's Weather-Ready Nation website has preparedness information for whatever the season may throw at you, from heat to floods and lightning.

FMCSA Proposes National Training Standards for Entry-Level Truck and Bus Drivers

The agency says comprehensive training will emphasize safety and driving efficiency as well as other key factors.

OSHA Drafts Guidance for Determining Potential Health Hazards of Chemicals

The document is intended to help manufacturers, importers and other employers.

DOL to Revoke Central Valley Labor Contractor's Certification after Worker's Death

The DOT says C.A.T. Labor Services violated federal laws.

NETS Reckons Crashes Cost Employers $47.4 Billion in 2013

Protecting employees from motor vehicles crashes could be a profitable investment for U.S. businesses, according to a new report from the Network of Employers for Traffic Safety.

NASA Contracts for Design of Quieter Supersonic Jet

"Developing, building, and flight testing a quiet supersonic X-plane is the next logical step in our path to enabling the industry's decision to open supersonic travel for the flying public," said Jaiwon Shin, associate administrator for NASA's Aeronautics Research Mission.

Lack of Fall Protection Led to Roofer's Death at Work Site

OSHA has issued 15 citations to R&B Contractors for safety lapses.



A culture of awareness as well as the proper work practices and procedures are essential components in preventing accidents, but they can only go so far to protect lab workers from hazards. (Workrite Uniform Company photo)

The Science of Laboratory Safety

A recent surge in FR lab coat usage has led to an increase in FR options for lab workers.

Even with hearing conservation programs in place, there are still numerous recordable hearing loss events.

Is 85/3 In the Cards?

An overwhelming body of documented evidence suggests that the current PEL should be lowered to 85 dBA and the exchange rate be lowered to 3 dB.

Depending on the quantity and nature of the hazmat spill, there are a number of reporting and notification requirements that must be enacted in a limited amount of time.

Controlling the Situation: Actionable Steps to Help Mitigate Hazmat Incidents

Accidents happen, but taking proactive steps ahead of an accident ensures your facility is prepared and reduces the chances of a larger incident from occurring.

Huge bales of fiber—from 400 to 700 pounds each, depending on the fiber—are delivered to a yarn plant for processing. (TenCate Protective Fabrics photo)

Inherent vs Treated: The Building Blocks of Flame-Resistant Fabrics Matter

Whether purchased by individuals, supplied by the company, or leased through a laundry service, FR clothing arrives for wear.

Employers should make every effort to not only observe OSHA standard 1910.147, but also make sure complying with the standard is as easy and efficient as possible. (ZING Green Safety Products photo)

A LOTO Tools Tutorial

A centralized lockout station prevents confusion and clutter. Maximizing space, in addition to streamlining operations, also helps to make a facility safer.

Opening Personal Mindfulness

Leaders have to first embrace reality, then help others do the same.

In many cases, just knowing they are being tracked and receiving text message and email alerts themselves can have a significant positive impact on drivers

Improve Driver Safety with GPS Fleet Tracking

Knowing which drivers commit unsafe behaviors the most or least allows a manager to reward and reinforce safe driving habits, provide additional training on safe driving, and coach drivers to safer driving habits.

In-Vehicle Technologies to the Rescue

NHTSA Administrator Dr. Mark Rosekind and U.S. Transportation Secretary Anthony Foxx announced a proposed $4 billion federal investment to accelerate the development of safe vehicle automation.

Employers

Are You Fire Ready?

If you expect your workers to use firefighting equipment, you should give them appropriate equipment and train them annually to use the equipment safely.

Annually, more than 3.5 million inspections of commercial vehicles are conducted in the United States. Vehicles that fail inspection are immediately placed out of service.

DOT's Chief Touts Value of Roadside Inspections

More than 3.5 million inspections of commercial vehicles take place annually in the United States. These roadside checks have saved 7,000 lives since 2001, according to DOT.

Typically the fire department arrives anywhere from 4 to 10 minutes from the time of the 911 call. It is important to have accounted for all employees, visitors, and contractors.

Fire Drills: Evaluating Employee Exit Strategies

A major issue with conducting pre-announced fire drills is that employees know the drills are not a real emergency alert and therefore, have no sense of urgency.

HVLS fans move larger volumes of air while using less energy than high-speed fans and produce a less disruptive wind speed. (Rite-Hite Fans photo)

Improving Indoor Environments with HVLS Fans

The use of HVLS fans has gained increased attention as a practical, affordable solution to improving air movement, reducing heat stress, and creating overall better environmental control.

Product Showcase

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

Featured

Artificial Intelligence

Webinars