Articles


It is worth noting that the process of de-energizing a system is energized work. Until the absence of voltage is verified, any work done is still considered energized and, therefore, requires appropriate hazard protections, such as arc-rated PPE. (Westex by Milliken photo)

Four Parties Affected by NFPA 70E Updates in 2018

The updated NFPA 70E can be explored through the lens of parties impacted. Through analyzing party responsibility, safety engineers and managers can make informed decisions to comply.

Training programs always must focus on why it is never acceptable to take shortcuts and "work around" safety codes to complete a job more quickly. (Molex, LLC photo)

Utilizing Proper Technologies Key to Ensuring Electrical Safety

Adequate training, protection from exposure, and disciplined use of ground fault circuit interrupters are integral to keeping workers safe.

One Tall Order

Wind turbines are getting larger and larger. Some turbines' nacelles can be about 160 meters—about 525 feet—above the ground, and the blades can be about 75 meters long.

Most Emergency Response Plans read well on paper but have gaps that typically come to light only when a plant-wide drill is conducted to test the plan.

The Value of Realistically Testing Your ERP

Warning! This is a test. This is a test of the Emergency Response Plan.

Portable Gas Detection

Safety should always be of the highest priority—it is the reason these detectors were invented, after all.

The 'Surprising' Realities of Slips, Trips & Falls: What It Takes to Actually Make Significant Improvements

What you think helps actually can make things worse. For example, increasing coefficient of friction can increase trips when footing "sticks" on a surface.

A well-run program is the best way to help ensure that your welders are protected from respiratory hazards. (3M photo)

Tips for Dealing with Respiratory Hazards in Welding

After identifying the hazards, the exposure levels from the exposure assessment must be compared to the permissible exposure limit, as set by OSHA, to determine whether respiratory protection is needed.

Maryland Paid Leave Battle Lines Drawn

Gov. Larry Hogan this week unveiled the Paid Leave Compromise Act of 2018, saying it will be filed as emergency legislation and be ready on the first day of the legislative session starting in January. He vetoed HB1, the paid leave bill passed by the General Assembly, in May 2017.



We congratulate the 22 winners in our tenth annual contest recognizing the most innovative new safety products.

2017 NPOY Contest Winners Honored

We congratulate the 23 winners in our ninth annual contest recognizing the most innovative new safety products.

To fight any fire effectively, the person operating the extinguisher must be able to move around easily and safely while holding the extinguisher. (Johnson Controls photo)

Get the Facts About Fire Extinguisher Selection

In tough, high-hazard environments, fire extinguishers are put to the test.

The 2016 standard was written to be scalable to meet the needs of both large and small companies with varying levels of technology present in their machinery and processes.

Controlling Hazardous Energy with Lockout/Tagout—Common Challenges and Best Practices

We have found that only about 10 percent of companies run effective lockout programs. In fact, we have observed that up to three-out-of-ten employers have no lockout program at all.

The safety manager can instantly see, via his or her own smartphone, tablet, laptop, etc., which worker is using which detector. (Honeywell Industrial Safety photo)

Connect Workers and Technology for Safer, More Efficient Work Sites

Acquiring the latest software for safety management and monitoring can make a significant difference. The key is connected technology.

Many Protective Glasses Not Tested on Ultrafast Pulsed Lasers, NIST Warns

Many laser eyewear products are not being tested with ultrafast pulsed lasers, the type that increasingly supply light for biomedical applications and imaging, materials processing, industrial micromachining, and that means the eyewear may not provide adequate protection for the technical workers who depend on them, researchers found.

New Risk Research Institute Launched in Britain

The plan is for the institute's researchers to take lessons learned from four decades of incident investigations and research and make them accessible to industry, helping to ensure mistakes aren't repeated as new technologies and industries emerge.

Fourteen Appointed to HHS Tick-Borne Disease Working Group

HHS reports that Lyme disease accounts for the majority of tick-borne disease in the United States, and CDC estimates more than 300,000 people are diagnosed with Lyme disease annually, but only about 30,000 of those cases are reported to local and state health departments and to CDC.

DEA Restructuring Includes Louisville Field Division

The first new Field Division in nearly 20 years, it will be established on Jan. 1 and will include Kentucky, Tennessee, and West Virginia.

2018 NFPA Fire Code Has Been Released

NFPA 1-2018 contains a new chapter on marijuana growing, processing or extraction facilities and another new chapter on cleaning and purging of flammable gas piping systems.

WHO Estimates 10 Percent of Developing Countries' Medical Products Falsified or Substandard

"Substandard and falsified medicines particularly affect the most vulnerable communities," said Dr. Tedros Adhanom Ghebreyesus, WHO's director-general. "Imagine a mother who gives up food or other basic needs to pay for her child's treatment, unaware that the medicines are substandard or falsified, and then that treatment causes her child to die. This is unacceptable. Countries have agreed on measures at the global level – it is time to translate them into tangible action."

Insurance Agent Sentenced in Comp Fraud Case

The Washington state Attorney General's Office prosecuted the case as an aggravated offense because it happened over a long time and involved multiple acts as well as the loss of a large amount of money.

ASSE Seeking New Executive Director

"We welcome any nominations for executives who you believe would be a great fit for the role, as well as invite any interested parties to submit their resumes to the Korn Ferry team," said ASSE President Jim Smith, MS, CSP.

Product Showcase

  • Preventative Heat Safety

    Dehydration and heat exposure impair physical and cognitive performance. Proper hydration boosts heat stress resilience, but hydration needs are highly individualized and hard to predict across a workforce. Connected Hydration® empowers industrial athletes to stay safe through behavioral interventions, informed by sports science, and equips safety teams with critical insights to anticipate high-risk situations and adapt to evolving environmental factors. Curious about applying the latest in sports science based hydration strategies for industrial athletes? Stop by booth #1112 at AIHA or schedule a free demo today at https://epcr.cc/demo. Read More

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence

Webinars