Articles


Excelling at Safety Means Making Worker Well-Being a Priority on the Job Site

Excelling at Safety Means Making Worker Well-Being a Priority on the Job Site

Leaving the worksite pain free for activities outside of work is critical for a healthy worker and a safer jobsite. 

OSHA Releases Details on Deadly Poultry Plant Incident

Episode 87

OSHA Releases Details on Deadly Poultry Plant Incident

Six people died and 12 more were injured in a preventable incident at a poultry plant last January. In this episode, editor Sydny Shepard details OSHA's investigation and dives into workplace violence, COVID-19 vaccination mandates and more.

Combining Innovations for the Perfect PPE

Combining Innovations for the Perfect PPE

Manufacturers have begun combining the newest innovations and technologies to suit specific applications and industries. 

Understanding the Differences Between Construction and General Industry Confined Space Regulations 

Understanding the Differences Between Construction and General Industry Confined Space Regulations 

Because construction was specifically excluded from following the general industry confined space standard, OSHA would have to cite concerns in the construction industry under several different areas.

 A Surge in Traffic Deaths Leads to the Creation of the Road to Zero Resolution

A Surge in Traffic Deaths Leads to the Creation of the Road to Zero Resolution

Although there were less people out and about during quarantine, traffic deaths spiked by 7.2 percent last year.

The CDC Guidelines are Changing Again to Protect Americans

The CDC Guidelines are Changing Again to Protect Americans

The delta variant is spreading at a rapid pace and causing COVID-19 cases to soar, leading the mask mandate to make a comeback.

Steps to Prevent Violence on the Job

Steps to Prevent Violence on the Job

The Illinois Department of Labor and OSHA highlight ways to address violence issues in the workplace.



NYC and California Reveal Plans to Require Vaccinations or Testing with Shots being Mandatory for Medical Workers

NYC and California Reveal Plans to Require Vaccinations or Testing with Shots being Mandatory for Medical Workers

The U.S. is seeing an increase in weekly COVID-19 cases due to the delta variant.

Focusing on Fatal Risk:  Why PSIFs Should be the Foundation  of Your Hazard Assessment

Episode 86

Focusing on Fatal Risk: Why PSIFs Should be the Foundation of Your Hazard Assessment

What's a PSIF and why is it so important to the safety of your facility? In this episode, Editor Sydny Shepard sits down with Fastenal's Joseph Solheid to define this term and describe how safety professionals can use it to their advantage.

U.S. Department of Labor Cites Dredging Manufacturer after Investigation into Worker’s Death

U.S. Department of Labor Cites Dredging Manufacturer after Investigation into Worker’s Death

OSHA investigation finds that safety procedures could have prevented the tragedy.

U.S. Department of Labor Cites Four Companies after Investigation shows Six Deaths were Preventable

U.S. Department of Labor Cites Four Companies after Investigation shows Six Deaths were Preventable

OSHA finds these companies have a total of 59 safety and health violations.

Americans See Steepest Decline in Life Expectancy Since WWII

Episode 85

Americans See Steepest Decline in Life Expectancy Since WWII

In this episode, Editor Sydny Shepard discusses a new partnership between NIOSH and ASA to protect temporary workers, new data on the latest decline in life expectancy and research that shows heat-related injuries might be significantly underreported.

A Roofing Contractor Violates its Agreement to Protect its Workers and Faces More Than $600K in Penalties

A Roofing Contractor Violates its Agreement to Protect its Workers and Faces More Than $600K in Penalties

Janiec Roofing Inc. does not comply with OSHA’s previous settlement agreement.

U.S. Life Expectancy Faced its Biggest Drop since WWII

U.S. Life Expectancy Faced its Biggest Drop since WWII

Life expectancy declined by an average of 1.5 years in 2020 for Americans.

Study Shows Heat Injuries in the U.S. are found to be Undercounted

Study Shows Heat Injuries in the U.S. are found to be Undercounted

Thousands of heat injuries across the country went unaccounted for.

Metal Stamping Manufacturer Exposed Employees to Amputation Dangers Leading to a Worker Suffering a Severe Injury

Metal Stamping Manufacturer Exposed Employees to Amputation Dangers Leading to a Worker Suffering a Severe Injury

A federal inspection of D&D Manufacturing Inc. in El Paso, TX leads to a $412,750 fine.

U.S. Department of Labor Cites Three Employers at Missouri Residential Care Facility

U.S. Department of Labor Cites Three Employers at Missouri Residential Care Facility

OSHA claims three companies did not take the proper steps to contain potential residue containing asbestos.

Product Showcase

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

Featured

Artificial Intelligence

Webinars