Nevada OSHA Adopts Federal Rule on PPE in Construction
Nevada OSHA has adopted federal OSHA’s new rule requiring properly fitting PPE in construction.
- By Stasia DeMarco
- Feb 18, 2025
Nevada's OSHA has formally adopted the federal OSHA’s final rule on PPE in construction, which took effect on Jan. 13, 2025. The rule, which Nevada OSHA adopted on Feb. 7, mandates that PPE used in construction must properly fit employees to ensure adequate protection from workplace hazards.
The new rule updates the requirements to explicitly state that PPE must be of an appropriate size, eliminating the risks associated with equipment that is too large or too small. Employers must ensure all PPE is safely designed for the job and fits each employee properly under the revised regulations.
The primary goal of this amendment is to reinforce employers' responsibility to provide properly fitting PPE, which is a key component of workplace safety programs. Improperly fitted PPE can fail to offer protection, create additional hazards, and discourage workers from using necessary safety equipment.
The change is expected to particularly benefit women in construction, who often require smaller PPE sizes than those commonly available. It also addresses concerns for workers who exceed the weight limits prescribed by PPE manufacturers, such as harnesses and other safety gear.
Filing a Workplace Safety Complaint
Employees who believe they have been exposed to hazardous workplace conditions have the right to report concerns to their employer or file a complaint with Nevada OSHA.
Complaints can be filed confidentially through www.osha.gov/workers/file-complaint.
About the Author
Stasia DeMarco is the Content Editor for OH&S.