OSHA Fines Georgia Construction Contractor for Safety Lapses Following Fatal Worker Fall

OSHA Fines Georgia Construction Contractor for Safety Lapses Following Fatal Worker Fall

NOR-D LLC faces $61,065 in proposed penalties following the death of a 54-year-old worker.

Following a fatal fall at a Macon, Georgia, warehouse, construction contractor NOR-D LLC has become the subject of an OSHA investigation, resulting in proposed penalties of $61,065. 

According to a recent release, the November 2023 incident—which claimed the life of a 54-year-old worker—occurred on the first day of a five-man crew's assignment to remove tar and stone from metal roof panels. While dumping debris off the roof, the worker stepped on a skylight and fell approximately 19 feet, ultimately succumbing to severe injuries hours later.

OSHA’s investigation revealed that NOR-D LLC failed to equip employees with the required fall protection systems. The company also neglected to notify OSHA within the mandated eight hours following the incident. In a follow-up inspection two months later, OSHA inspectors found the company still did not provide the essential safety measures.

“After more than 20 years of experience as a roofing and framing contractor, NOR-D LLC should know the work its employees do is dangerous and potentially fatal, especially when safety protocols are ignored,” OSHA Area Director Joshua Turner in Atlanta said in a statement. “Falls are widely known as the leading cause of death in the construction industry and had required fall protections been in place in this case, a worker’s family, friends and co-workers would not be left now to grieve a terrible loss.”

OSHA identified nine serious violations by NOR-D LLC, including the absence of fall protection systems, lack of safety guardrails on skylights, improper use of forklifts, defective ladders, and failure to provide protective eyewear and adequate training for forklift operators. The agency also noted that the company did not ensure timely medical treatment for the injured worker.

NOR-D LLC now has 15 business days from the receipt of its citations and penalties to comply, request an informal conference with OSHA’s area director or contest the agency’s findings.

About the Author

Robert Yaniz Jr. is the Content Editor of Occupational Health & Safety.

Product Showcase

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Safety Shower Test Cart

    The Safety Shower Test Cart speeds up and simplifies emergency shower tests, ensures you stay in compliance with OSHA regulations, and significantly reduces testing costs. With 7 unique features, the cart makes testing easy, effective, and efficient. You can test water clarity, flow, temperature, and spread—all at the same time! Most safety shower testing kits create a mess, take too much time to use, and don't fully help you stay in compliance with OSHA & ANSI standards. Transform the way you test emergency showers with Green Gobbler Safety. Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

Featured

Webinars