Alabama Sawmill Faces Heavy Fines After Second Fatal Incident in Three Years

Alabama Sawmill Faces Heavy Fines After Second Fatal Incident in Three Years

OSHA has deemed Phenix Lumber Co. a “severe violator” since 2020.

OSHA has proposed nearly $2.5 million in penalties against MDLG Inc., doing business as Phenix Lumber Co., following a fatal incident at their Phenix City, Alabama, facility. 

According to a release dated Feb. 22, the August 2023 incident marked the second employee fatality at the sawmill in three years. In this case, a 67-year-old sawmill supervisor—who had been working for the company for 20 years—died after being caught in machinery while attempting to unclog a woodchipper. 

The ensuing OSHA investigation revealed the tragedy could have been prevented if Phenix Lumber Co. had adhered to federal safety regulations. The agency issued citations for 22 willful violations, one repeat violation and five serious violations, amounting to $2,471,683 in proposed penalties. 

Inspectors identified multiple safety failures, including inadequate energy control procedures, lack of lockout/tagout devices during maintenance, insufficient training on energy control, unguarded machinery, absence of fall protection, and non-compliance with forklift and fire extinguisher safety standards.

“Phenix Lumber’s willful disregard for the well-being of their employees leaves another family to grieve the loss of their loved one. This must stop,” OSHA Regional Administrator Kurt Petermeyer in Atlanta said in a statement. “This worksite has become all too familiar to OSHA. Phenix and its owners have a legal responsibility to follow federal safety laws that are meant to prevent the exact hazards that cost this employee’s life.”

Phenix Lumber Co. was added to OSHA’s Severe Violators Enforcement Program following the previous fatality in 2020. The company has faced four inspections in the last five years, resulting in multiple citations for willful and serious violations. Now Phenix Lumber Co. has 15 business days from the receipt of the citations to comply, request a conference with OSHA’s area director, or contest the findings.

About the Author

Robert Yaniz Jr. is the Content Editor of Occupational Health & Safety.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. 3

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. 3

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" 3

Featured