Fall Protection Training: Now’s the Time to Prepare Your Team

Fall Protection Training: Now’s the Time to Prepare Your Team

Slip, trip and fall hazards are everywhere. Now is the time to prepare your team.

Every winter, no matter what the industry is or how the work conditions are, slips, trips and falls consistently remains the top cause of workplace injuries and accidents.

These are injuries and accidents that not only impact the team member’s physical and emotional health but require valuable time off and may even involve costly litigation and fines.

It is imperative that the employer has protocols and measures in place to react to dangerous falls promptly and efficiently so that the severity of injuries is as low as possible. While such reactive safety measures are important to any successful safety program, proactive safety measures are even more integral, helping prevent incidents, like slips and falls, from occurring entirely. One of the most impactful, proactive OHS steps an employer can take is to regularly and thoroughly train their people in fall prevention and fall protection.

What Causes Slips and Trips?

Slip and trips hazards can exist everywhere—in some places you would not expect them. When assessing the workplace for slip hazards, look for conditions such as unattached, loose rugs and mats, uneven walking surfaces and work areas and slippery surfaces (wet and oily) due to weather or spills. On the other hand, potential areas for trips can be identified in places where your foot hits an object, resulting in the employee tripping and possibly falling.

Before these hazards cause any harm, they must be identified, documented and mitigated if possible. This can be accomplished through consultation with employees as well as regular and thorough hazard assessments of existing OHS dangers and risks.

What Types of Fall Protection Training Should You Provide?

When training your employees in fall prevention, you will need to do so based on three categories:

  • General safety
  • Site-specific safety (applicable to specific sites with particular safety challenges)
  • Job-specific safety

General Safety Training. General safety training is applicable to all work sites and work circumstances, teaching practices that will prevent slips, trips and falls in any of your work environments. This can include education around standardized signage warning employees of possible tripping hazards when it gets icy or establishing a system to reduce clutter in high-traffic areas where people may trip and fall.

Site-Specific Safety Training. Site-specific safety training, however, addresses the particular, unique safety challenges of a specific work site such as an unstable walkway or a work area that is difficult to navigate by foot. If the employee is working at multiple sites, you may require multiple training sessions to address each location’s individual safety hazards and risks.

Job-Specific Safety Training. On an even more granular level, employers may need to provide task or job-specific safety training to prevent tripping and fall hazards. If employees use a certain piece of equipment that uses chords or other obstructive parts, they will need to be trained on how to work with this equipment safely and avoid falls when in use.

Additional Safety Measures to Prevent Workplace Slips and Falls

On top of safety training, employers also must provide and initiate additional measures for the safety of their team. What’s important is that when considering more safety steps, make sure they complement your team’s safety training and vice versa.

Complementary fall protection safety measures can include a safety-hazard reporting channel that allows staff to report fall hazards easily and discreetly as well as dependable technologies and wearables that use motion sensors to detect dangerous falls and impact, requesting immediate help if the worker is unconscious.

In addition to hazard assessments, consider performing a job safety analysis (JSA). A JSA is a process that incorporates new safety steps in specific work tasks. A proper JSA is incredibly detailed, addressing safety hazards in specific work on a very granular level.

Resources for Fall-Protection Safety Training

Fall Prevention Training Guide: A Lesson Plan for Employers. OSHA developed the “Fall Prevention Training Guide: A Lesson Plan for Employers,” which helps employers develop safety training programs in fall prevention with a focus on ladder safety, scaffolding safety and roofing work safety.

Fall Protection Safety Training Opportunities. The American Society for Safety Professionals has a number of fall protection resources including its Fall Protection Toolkit that provides a comprehensive guide to creating fall-protection plans, incorporating best practices into your workflow and using and training people for fall-protection equipment. 3M offers safety training and education for fall protection as well as working in confined spaces. These courses focus on teaching the “proper usage, inspection, and maintenance” of fall-arrest and confined-space systems across all industries.

Now’s the Time to Talk About Fall Protection

With colder and possibly increasingly slippery work conditions approaching some of us, now is the time to look at fall protection training and other resources that could make things safer this season. What’s important is that the discussion is started as soon as possible because it will make the issue known and your people more aware—and much safer—in the process.

This article originally appeared in the December 1, 2022 issue of Occupational Health & Safety.

Industrial Hygiene Product Showcase

  • Moldex Airwave Disposable Respirators

    Moldex Airwave Disposable Respirators

    Say hello to the N95 mask that is so comfortable and easy breathing, it can positively impact worker productivity and happiness on the job. The AirWave’s proprietary pleated design makes breathing easier and comes in multiple sizes with an adjustable strap for a customizable fit. Airwaves also have an ultra-tough Dura-Mesh® shell that resists collapse even in the hottest and most humid conditions. They have a metal-free molded nose bridge that seals easily without a metal noseband for added protection and comfort. It’s official: AirWave is a difference you can feel. 3

  • Ventis® Pro5

    Ventis® Pro5

    The Ventis Pro5 is the most flexible connected gas monitor on the market, giving you the power to protect workers from up to five gases, manage worker safety from remote locations, and simplify team communication to take the guesswork out of gas detection. It automatically shares real-time gas readings, man-down, and panic alarms between peers – meaning the entire team knows who is in danger and why. By sharing real-time data, workers can also maintain continuous communication without the need for additional infrastructure or devices. Visit us at AIHce booth #927 to learn more! 3

  • BAND V2 Wearable Heat Monitor/Alert

    BAND V2 Wearable Heat Monitor/Alert

    Need help with your heat program to meet the OSHA Heat-related Hazards NEP? The SlateSafety BAND V2 arm-worn monitor provides 24/7 connected real-time monitoring of heart rate, exertion levels, and core temperature. BAND V2 alerts workers and OH&S professionals before heat exposure injuries occur. Tough to withstand harsh environments, yet comfortable for workers and easy to use for you, BAND V2 can optimize work/rest cycles, promoting safety and productivity. Its powerful web-based platform and the new Go Mobile App helps you connect and protect workers from heat stress in real-time. Visit SKC at AIHce Booth 601 for a demo! 3