Illinois Contractor Faces Over $118K in Proposed Penalties, Repeat Violations After OSHA Finds Cave-In Hazards

Illinois Contractor Faces Over $118K in Proposed Penalties, Repeat Violations After OSHA Finds Cave-In Hazards

The contractor was cited twice before for these hazards.

An Illinois excavating contractor is facing citations after OSHA found workers exposed to cave-ins while working in a seven-foot trench.

According to a news release, an inspector discovered that two workers were not “adequate[ly]” protected from cave-ins and had no means of trench entry or exit that were safe when working in the trench in June 2022.

Lamp Concrete Contractors Inc. was cited for five violations: three repeat, one serious and one other-than-serious. The company faces proposed penalties of $118,962.

"In mere seconds, thousands of pounds of soil can trap a worker in a trench collapse and lead to serious and often fatal injuries," explained U.S. Department of Labor's Occupational Safety and Health Administration Chicago North Area Director Angeline Loftus in Arlington Heights, Illinois in the news release. "Our inspector found that a company foreman was supervising the work of two employees in the unprotected trench, which demonstrates the company's lack of concern for federal regulations, industry-recognized best practices and its legal responsibility to protect workers on the job."

This is not the first time the company has been cited by OSHA for cave-in hazards. In 2018 and 2021, A. Lamp Concrete received citations for this hazard.

Twenty-two workers died from trench hazards in the first six months of 2022 compared to 15 worker deaths from these hazards in 2021. This spurred OSHA to announce in July 2022 an increase in oversight and enhanced enforcement.

Photo credit: BY-_-BY / Shutterstock.com

About the Author

Alex Saurman is a former Content Editor for Occupational Health & Safety,who has since joined OH&S’s client services team. She continues to work closely with OH&S’s editorial team and contributes to the magazine.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

Featured