Wrong Equipment Cited in Drowning Investigation

The Transportation Safety Board of Canada's investigation found that the third officer used a rope ladder to read the seaward draft marks in the middle of the vessel. When resting flat against the vessel's hull, this ladder leaves little room for hand and foot holds, making it unsuitable for this task, and the rope ladder was rigged to the guardrail in such a way that there was no safe way to access the ladder from the deck.

The Transportation Safety Board of Canada released its investigation report Nov. 2 into a drowning that occurred in Quebec last year. The board found that unsuitable equipment and inadequate work procedures on the general cargo vessel Amazoneborg led to a crew member falling overboard and subsequently losing his life.

The cargo vessel was docked on Sept. 29, 2017, in the Port of Trois-Rivières, Quebec. The third officer was assigned to take the vessel's draft measurements as part of routine cargo operations. Some time after going to read the draft marks amidships on the seaward side, the third officer was reported missing. Search and rescue authorities conducted a search of the area without success. The third officer's body was found eight days later near Champlain, Quebec.

According to the board, the investigation found that the third officer used a rope ladder to read the seaward draft marks in the middle of the vessel. When resting flat against the vessel's hull, this ladder leaves little room for hand and foot holds, making it unsuitable for this task, and the rope ladder was rigged to the guardrail in such a way that there was no safe way to access the ladder from the deck. The third officer may have fallen while climbing over the vessel's guardrail to use the ladder or while using the ladder.

"While a permit was required to work overboard on the vessel, there were no instructions or procedures for taking draft measurements in the company or vessel manuals. The investigation found that no one was aware of the third officer's actions, no fall protection system or personal flotation device was used, and no one was present to initiate emergency response when the third officer went overboard," the board reported. "If routine tasks are not addressed in the shipboard operating procedures, there is a risk that these tasks will not be conducted safely and that unsafe practices will persist, endangering the lives of crewmembers."

After the death, the vessel's operator discontinued the use of rope ladders and replaced them with embarkation ladders. Use of a fall protection system and a personal flotation device and the presence of second crew member with access to lifebuoys and a communication system are now required for working overboard. The company also explained the various methods available for taking draft measurements to its crews.

Product Showcase

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

  • HAZ LO HEADLAMPS

    With alkaline or rechargeable options, these safety rated, Class 1, Div. 1 Headlamps provide long runtime with both spot and flood options in the same light. Work safely and avoid trip hazards with flexible hands-free lighting from Streamlight. Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

Featured

Artificial Intelligence