NTSB Sets Meeting on New Mexico Train Crash

The incident occurred about 6:23 a.m. Mountain daylight time when a westbound freight train with nine locomotives and 79 cars collided with a standing train, causing all nine locomotives to derail. The moving train struck the stationary one after traveling through a misaligned switch, according to the safety board.

The National Transportation Safety Board has scheduled a March 13 meeting to determine the probable cause of an accident involving two freight trains in Roswell, N.M., on April 28, 2015. At the Washington, D.C., meeting, the board will issue safety recommendations intended to prevent similar accidents in the future.

The meeting will be available as a live webcast; the link to the webcast will be available shortly before the start of the meeting at http://ntsb.capitolconnection.org/.

The incident occurred about 6:23 a.m. Mountain daylight time when a westbound Southwestern Railroad freight train with nine locomotives and 79 cars collided with a standing SWRR train near Dexter, N.M. The moving train struck the stationary one after traveling through a misaligned switch at the east end of Chisum siding where the stationary train had previously worked, according to NTSB.

The board's previous information about the event said the accident train engineer placed the train into emergency braking about 500 feet prior to taking a diverging route from the main track into the Chisum siding. The train was travelling about 32 mph and struck the lead locomotive of the standing train with an impact speed of 31 mph, and that caused all nine locomotives to derail. Two locomotives and three empty hopper cars of the stationary train also derailed.

The board reported initially that the engineer and conductor jumped from the lead locomotive of the striking train prior to impact; the engineer was fatally injured and the conductor was life-flighted to a regional hospital in Lubbock, Texas with serious injuries. Weather at the time of the accident was 45 degrees with sunny skies and visibility of 10 miles, according to the safety board.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 Read More

Featured

Artificial Intelligence