Two Companies Fined for California Confined Space Fatality

A worker entered a drainage shaft last fall to clean out mud and debris. He stood inside a bucket attached to a mini crawler crane with no personal fall protection. After descending 10 feet into the shaft, the worker lost consciousness due to the oxygen-deficient atmosphere, fell approximately 40 feet, and drowned in a foot of water at the bottom.

Cal/OSHA has cited two companies, fining them $352,570, for workplace safety and health violations, including 10 serious and three willful violations, following an incident in which a worker lowered into a 50-foot drainage shaft fell to his death. Neither D&D Construction Specialties, Inc. nor Tyler Development, Inc. followed permit-required confined space procedures to work in confined spaces, according to the agency.

Cal/OSHA had cited D&D Construction, Inc. five years ago for violating similar safety orders at a different site.

The general contractor, Tyler Development was constructing a single-family residence in the Bel Air area and hired subcontractor D&D Construction to install and service reinforced concrete posts known as caissons. On Oct. 21, 2016, a D&D Construction worker entered the drainage shaft, which was 4.5 feet in diameter and lined with concrete, to clean out mud and debris. He stood inside a bucket attached to a mini crawler crane with no personal fall protection. After descending 10 feet into the shaft, the worker lost consciousness due to the oxygen-deficient atmosphere, fell approximately 40 feet, and drowned in a foot of water at the bottom.

"Cal/OSHA launched a confined space educational program to bring attention to the dangers and preventable deaths that occur in confined spaces," said Cal/OSHA Chief Juliann Sum. "The program helps employers identify hazards and create effective safety plans that include air monitoring, rescue procedures and training before work begins."

The agency fined D&D Construction $337,700 for 13 violations, including two willful serious accident-related, one willful serious, one serious accident-related, six serious, and three general in nature. The accident-related violations were cited for the company’s failure to ensure safe entry into the confined space; have an effective method to rescue the worker in the confined space in an emergency; and test the environment to determine whether additional protective equipment, such as a respirator or oxygen tank, were required to work safely in the shaft.

Tyler was cited $14,870 for five violations, three of them classified as serious violations, for failing to evaluate the work site for possible permit-required confined spaces; to ensure the subcontractor met all requirements to comply with a permit space program; and to protect workers from the hazard of impalement by guarding all exposed reinforced steel ends that extend up to 6 feet above the work surface with protective covers.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Full Line of Defense Against Combustible Dust Nilfisk

    Nilfisk provides a comprehensive range of industrial vacuums meticulously crafted to adhere to NFPA 652 housekeeping standards, essential for gathering combustible dust in Class I, Group D, and Class II, Groups E, F & G environments or non-classified settings. Our pneumatic vacuums are meticulously engineered to fulfill safety criteria for deployment in hazardous surroundings. Leveraging advanced filtration technology, Nilfisk ensures the secure capture of combustible materials scattered throughout your facility, ranging from fuels, solvents, and metal dust to flour, sugar, and pharmaceutical powders. Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

Featured

Artificial Intelligence