NYC Buildings Department: 86 Percent of City's Facades OK

The department's new report summarizes the inspection reports filed during the most recent five-year period by building owners. More than 7,700 buildings in the city have a sidewalk shed in front of them, DOB reported.

The New York City Department of Buildings has posted a new report mapping the façade conditions of more than 14,000 buildings citywide whose owners are required to submit Façade Inspection Safety Program results to the department in five-year cycles. The report summarizes the reports of Cycle 7, the most recently full cycle completed, in 2014. (Cycle 8 began in 2015 and is currently under way.)

The report is part of DOB's effort to modernize the agency and increase transparency through the use of advanced data analytics and mapping. It indicates 86 percent of the façade inspection reports in Cycle 7 were either in good condition (Safe) or were categorized as Safe With a Repair and Maintenance Program (SWARMP). There were 975 categorized as unsafe and another 874 as No Report, which means no report was submitted for them. Facades designated as SWARMP must be repaired within one to five years to prevent a potentially unsafe condition.

Local Law 11 of 1998 requires inspections of building exterior walls and appurtenances of buildings taller than six stories. Because 60 percent of the city's buildings taller than six stories are in Manhattan, that's where most of the façade inspections and reports are made – and also where 51.3 percent of façade violations occurred during 2010-2016. Property owners must install a sidewalk shed to protect the public when there is an unsafe façade or when there is façade maintenance work or an ongoing construction project. In all, more than 7,700 buildings in the city have a sidewalk shed in front of them, according to the report.

The inspections are conducted by private, qualified, registered design professionals who are not DOB employees. They assign these categories:

  • Safe: No problems and in good condition
  • Safe With a Repair and Maintenance Program
  • Unsafe: Problems/defects threaten public safety

"Sidewalk sheds are a necessary evil: They're ugly, but they're required by law to keep pedestrians safe. Our report will help New Yorkers understand why these structures went up on their block and how long they've been there. DOB's façade-safety report represents not only a step forward in our ability to monitor at-risk buildings, but also a new level of transparency and accountability for building owners who are required to do their part to keep every New Yorker safe," said Buildings Commissioner Rick Chandler, P.E.

Beginning in September 2016, building owners, managers, and design professionals had to use an online portal to submit their reports, pay filing fees, and report unsafe façade conditions. Violations are issued to owners who are not in compliance. Some of the violations issued by the FISP unit include:

  • Failure to File a Façade Technical Report
  • Failure to File and Amended Façade Technical Report
  • Failure to Maintain Building Walls
  • Failure to Protect the Public

Product Showcase

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. 3

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! 3

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. 3

Featured