The photo shows the Orin C on the day the vessel departed Gloucester, Mass., on Dec. 1, 2015. (Photo by M. Ring, included in the NTSB report)

NTSB Calls for Coast Guard Standard on First Aid Kits' Contents

The safety board's report on the December 2015 sinking of the fishing boat Orin C sank off Cape Ann, Mass., also recommends that the U.S. Coast Guard ensure that at all times, at least one crew member aboard each type of response boat is adequately trained on the medical emergencies expected in a marine environment and qualified in the use of first aid and trauma equipment carried on board.

A new report from the National Transportation Safety Board recommends that the U.S. Coast Guard develop a standard for the contents of first aid and trauma kits for each type of response vessel it operates and also ensure that at all times, at least one crew member aboard each type of response boat is adequately trained on the medical emergencies expected in a marine environment and qualified in the use of first aid and trauma equipment carried on board. The report examines the Dec. 3, 2015, sinking of the fishing boat Orin C off Cape Ann, Mass.

The wooden-hulled fishing boat went down while under tow after having to shut down its engine. A wave estimated at 15 feet hit it, parting the tow rope, and the three crew members were forced to don their immersion suits and abandon ship. Two crew members were rescued uninjured, but the captain, age 47, was not breathing when pulled from the water and did not survive.

The report finds that the probable cause of the sinking was the structural failure of the ship's hull and flooding of the vessel as it was towed in adverse conditions.

The report says NTSB investigators could not find any USCG standard for the contents of first aid and trauma kits carried about the Coast Guard's response vessels -- a 47-foot motor lifeboat was involved in the Orin C rescue -- and the board concluded no standard for kit contents on the boats exists.

Product Showcase

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

Featured

Artificial Intelligence