NTSB Examining Uncontained Engine Failure on Southwest Plane

So far, NTSB's initial findings from the examination of the airplane and the engine and a metallurgical examination show that the the left engine inlet separated from the engine during the flight, and debris from the inlet damaged the airplane fuselage and wing, gashing a 5-inch by 16-inch hole in the left fuselage just above the left wing.

The National Transportation Safety Board provided an update Sept.12 on its investigation of an Aug. 27, 2016, uncontained engine failure on Southwest Airlines flight 3472 as the Boeing 737-700 was flying from New Orleans to Orlando. The aircraft was diverted to Pensacola International Airport and safely landed without further incident.

So far, NTSB's initial findings from the examination of the airplane and the engine and a metallurgical examination show that the the left engine inlet separated from the engine during the flight, and debris from the inlet damaged the airplane fuselage and wing, gashing a 5-inch by 16-inch hole in the left fuselage just above the left wing. But no fan blade or inlet material was found in the hole, and the passenger interior compartment was not penetrated.

The airplane did experience a cabin depressurization.

According to NSTB, the aircraft's maintenance records are being reviewed.

A fan blade separated from the fan disk during the flight, and the root of that blade remained in the fan hub. Analysis showed curving crack arrest lines consistent with fatigue crack growth, with a fatigue crack region measuring 1.14 inches long and 0.217 inch deep. "The center of the fatigue origin area was about 2.1 inches aft of the forward face of the blade root. No surface or material anomalies were noted during an examination of the fatigue crack origin using scanning electron microscopy and energy-dispersive x-ray spectroscopy," according to NTSB, which added that the blades are made of a titanium alloy and the root contact face is coated with a copper-nickel-indium alloy.

The aircraft's flight data recorder and cockpit voice recorder were shipped to the NTSB Recorder Laboratory and the data from both have been downloaded. Parties to the investigation include FAA, Southwest Airlines, the Southwest Airlines Pilots Association, and CFM International.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

Featured

Artificial Intelligence