FDA Wants More Data on Hand Sanitizers

"Today, consumers are using antiseptic rubs more frequently at home, work, school and in other public settings where the risk of infection is relatively low," said Dr. Janet Woodcock, M.D., director of FDA's Center for Drug Evaluation and Research. "These products provide a convenient alternative when hand washing with plain soap and water is unavailable, but it's our responsibility to determine whether these products are safe and effective so that consumers can be confident when using them on themselves and their families multiple times a day. To do that, we must fill the gaps in scientific data on certain active ingredients."

The U.S. Food and Drug Administration published a proposed rule June 29 that requests additional scientific data to support the safety and effectiveness of some active ingredients used in hand sanitizers and topical consumer antiseptic rubs generally that are marketed over the counter, with the agency stating that its request "is intended to help the agency ensure that regular use of these products does not present unknown safety and efficacy concerns, and does not mean the FDA believes these products are ineffective or unsafe."

"Today, consumers are using antiseptic rubs more frequently at home, work, school and in other public settings where the risk of infection is relatively low," said Dr. Janet Woodcock, M.D., director of FDA's Center for Drug Evaluation and Research. "These products provide a convenient alternative when hand washing with plain soap and water is unavailable, but it's our responsibility to determine whether these products are safe and effective so that consumers can be confident when using them on themselves and their families multiple times a day. To do that, we must fill the gaps in scientific data on certain active ingredients."

FDA cites CDC's advice in this area, which is that washing your hands with ordinary soap and running water is one of the most important steps consumers can take to avoid getting sick and prevent the spread of infections to other people. If soap and water are not available, CDC recommends using an alcohol-based hand sanitizer that contains at least 60 percent alcohol.

"Based on new scientific information and input of outside scientific and medical experts on an independent advisory committee, the agency is requesting additional scientific data to demonstrate that the active ingredients used in consumer antiseptic rubs are generally recognized as safe and effective to reduce bacteria on skin. The agency is requesting manufacturers provide data for three active ingredients -- alcohol (ethanol or ethyl alcohol), isopropyl alcohol and benzalkonium chloride. Since 2009, 90 percent of all consumer antiseptic rubs use ethanol or ethyl alcohol as their active ingredient," FDA's announcement states. "The proposed rule does not require any consumer hand sanitizer products to be removed from the market at this time. Instead, it requires manufacturers who want to continue marketing these products under the OTC Drug Review to provide the FDA with additional data on the active ingredients’ safety and effectiveness, including data to evaluate absorption."

The agency said it is especially interested in gathering additional data on the long-term safety of daily, repeated exposure to these ingredients by consumers and on the use of these products by certain populations, including pregnant women and children, for which topical absorption of the active ingredients may be important. "Emerging science also suggests that for some antiseptic active ingredients, systemic exposure (full body exposure as shown by detection of antiseptic ingredients in the blood or urine) is higher than previously thought, and that more information is needed about the effects of repeated daily human exposure to some antiseptic active ingredients," according to the announcement, which said this rule is part of FDA's ongoing review of OTC antiseptic active ingredients to ensure they are safe and effective. FDA previously issued proposed rulemakings on consumer antiseptic washes (December 2013) and health care antiseptics (April 2015).

The proposed rule will be available for public comment for 180 days, and companies will have one year to submit new data and information; comments on any new data or information may then be submitted to the docket for an additional 60 days. The agency's final determination will be published as a final rule.

Product Showcase

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

Featured

Artificial Intelligence