Five Tips for Young Workers Taking Summer Jobs

An average of 79 men and women between 16 and 24 are hurt on the job every day in Washington, according to the state's Department of Labor & Industries (L&I).

Among those killed on the job in Washington last year were five men under the age of 25, including one who was 18. An average of 79 men and women between 16 and 24 are hurt on the job every day across the state, according to the Washington Department of Labor & Industries (L&I).

With the approach of the summer job season, the L&I is urging young workers to be mindful of the workplace hazards around them.

"Something that happens to you when you're a young worker is going to affect you when you're 30, 40, 50 years old. It could affect you for the rest of your life," said Matt Pomerinke, who lost an arm in an industrial accident when he was 21 and now speaks to teens about workplace safety.

Young workers tend to be hurt at work at a higher rate than adults. If you're a young worker about to start work this summer, here are some tips to stay safe:

1. Always get proper training on how to complete a job or use equipment properly before you begin the work.

2. You have the right to say “no” to tasks you feel unsafe doing, such as climbing a ladder or operating a new piece of equipment. Your boss cannot retaliate against you for refusing hazardous work.

3. Look for hazards at work, like slippery floors, hot grease, dangerous machinery, or ladders. If you see a hazard or a problem that needs fixing, don't try to do it yourself—ask a supervisor for help.

4. There are special laws that protect teens under 18 – make sure you know your rights on the job by visiting http://www.osha.gov/youngworkers/.

5. If you are injured at work—even a small cut—be sure to report it. That way you'll be covered by workers' compensation if the problem becomes more serious.

"I tell the students I talk to that they should ask lots of questions and get all the training they can. That's really the key," Pomerinke said. "You're not going to know all the hazards with your job just walking into it."

Product Showcase

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • HAZ LO HEADLAMPS

    With alkaline or rechargeable options, these safety rated, Class 1, Div. 1 Headlamps provide long runtime with both spot and flood options in the same light. Work safely and avoid trip hazards with flexible hands-free lighting from Streamlight. Read More

Featured

Artificial Intelligence