Landscaping Safety: Tips to Help Prevent Injuries

In the landscaping industry, an ounce of prevention is worth a pound of cure. It is always better to try and prevent an injury before it occurs, according to Denver-based Eley Law Firm, which specializes in worker’s compensation.

Landscaping is a dangerous profession. Heat, power tools, sharp implements, and repetitive work can all lead to painful and sometimes debilitating workplace injuries.

In the landscaping industry, an ounce of prevention is worth a pound of cure. It is always better to try and prevent an injury before it occurs, according to Denver-based Eley Law Firm, which specializes in worker’s compensation.

The law firm recently released the following safety tips for landscapers:

  • Stay visible and dress for safety: Motor vehicle accidents are the leading cause of fatal accidents among landscapers. While at work, landscapers should always wear high-visibility colors. In addition, long pants, sturdy shoes, gloves, and ear and eye protection are a must for any landscaper. Dress for the weather and avoid any loose clothing or jewelry that could get caught in equipment.
  • Keep tools sharp: A dull blade is far more dangerous than a sharp one because the user has to exert a lot more force to get the job done. Keeping hand tools in good working order can also help protect landscapers from repetitive-stress injuries.
  • Know your machine: A lot of power tools—like tillers, blowers, mowers, and trenchers—can cause severe injuries if they malfunction or are used incorrectly. Workers should always read the safety manual before using a new tool for the first time.
  • Be careful with repairs: Before attempting to fix or clear a jam from a power tool or mower, make sure that the power supply is turned off and all the blades have stopped moving. Too many landscapers experience tragic amputations from the spinning blades in lawnmowers and other tools.

Following these tips can help landscapers stay safe during the busy summer season.

Product Showcase

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • HAZ LO HEADLAMPS

    With alkaline or rechargeable options, these safety rated, Class 1, Div. 1 Headlamps provide long runtime with both spot and flood options in the same light. Work safely and avoid trip hazards with flexible hands-free lighting from Streamlight. Read More

Featured

Artificial Intelligence