FDA Working to Prevent Radiation Overdoses During CT Scans

The Food and Drug Administration has been investigating reports that patients undergoing computed tomography (CT) brain perfusion scans were accidently exposed to excess radiation. FDA found that when properly used, the CT scanners did not malfunction. Instead, it is likely that the improper use of the scanners resulted in these overdoses.

However, FDA has identified a series of promising steps to enhance the safety of these procedures. These steps could reduce the likelihood of radiation overexposure in the event of improper use of the CT scanners.

FDA has sent a letter to the Medical Imaging and Technology Alliance, the major professional industry organization for manufacturers of CT scanners and other radiological imaging devices, reporting on the results of the investigation and discussing possible CT equipment enhancements that could improve patient safety. The agency will hold follow up discussions with manufacturers on the changes.

Those changes include:

  • A console notification to alert the operator of a high radiation dose;
  • Providing particular information and training on brain-perfusion protocols to all facilities that receiving base CT equipment, whether or not the facilities purchase the related software enabling quantitative analysis of cerebral hemodynamics;
  • Clarification of parameters affecting dose, along with clear instructions on how to appropriately set those parameters; and
  • Organization of all dose-related information into one section of each user manual, in a dedicated dose manual, or indexed comprehensively in a concordance covering all manuals.

CT brain perfusion scans produce cross-sectional images of the head that evaluate blood flow in the brain. In an update released on Nov. 9, FDA discussed findings of a probe into radiation overdoses in patients who received CT brain perfusion scans in hospitals located in California and Alabama.

Begun in 2009, FDA's investigation included information from the states and facilities where radiation overdoses occurred from 2008 to Oct. 26, 2010. The agency also inspected CT scanner equipment manufacturers.

The probe indicated that CT scanners, when properly used, did not result in overdoses. However, the investigation uncovered potential enhancements to CT equipment that could reduce the likelihood of radiation overexposure if improper use occurs--a goal of the agency's Initiative to Reduce Unnecessary Radiation Exposure from Medical Imaging.

"Improving patient safety is part of our public health mission," said Jeffrey Shuren, M.D., director of FDA's Center for Devices and Radiological Health. "Patients should not have to worry that a device designed to diagnose an illness exposes them to unnecessary risks."

Since the investigation began, FDA is aware of at least 385 patients who received excessive radiation from CT brain perfusion scans, many undergoing the test to confirm the presence of a stroke, performed at five hospitals in California and one in Alabama.

For more information, click here.

Product Showcase

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Full Line of Defense Against Combustible Dust Nilfisk

    Nilfisk provides a comprehensive range of industrial vacuums meticulously crafted to adhere to NFPA 652 housekeeping standards, essential for gathering combustible dust in Class I, Group D, and Class II, Groups E, F & G environments or non-classified settings. Our pneumatic vacuums are meticulously engineered to fulfill safety criteria for deployment in hazardous surroundings. Leveraging advanced filtration technology, Nilfisk ensures the secure capture of combustible materials scattered throughout your facility, ranging from fuels, solvents, and metal dust to flour, sugar, and pharmaceutical powders. Read More

Featured

Artificial Intelligence