The FAA proposed rule will require certificate holders with 10 or more helicopter air ambulances to establish operations control centers.

FAA Publishes New Air Ambulance Regulation

Making certificate holders with 10 or more helicopter air ambulances establish operations control centers is one facet of the proposal, which is intended to make helicopter air ambulance flights safer nationwide.

The Federal Aviation Administration published its 36-page proposed rule Tuesday intended to make helicopter air ambulance flights safer nationwide. The proposal will revise Part 91 visual flight rules weather minimums, require all commercial helicopters to be equipped with radio altimeters, require air ambulance flights with medical personnel aboard to be conducted under part 135 (including flight crew time limits and rest requirements), require Helicopter Terrain Awareness and Warning Systems (HTAWS), and require certificate holders with 10 or more helicopter air ambulances to establish operations control centers. Most of these changes fulfill NTSB recommendations made in recent years.

Comments are due by Jan. 10, 2011; submit them to docket number FAA-2010-0982 at www.regulations.gov.

FAA estimated the proposal will cost the industry $225 million and yield benefits ranging from $83 million to $1.98 billion during a 10-year period.

The agency said it reviewed about 4,000 accidents involving helicopters in the United States, of which 75 commercial helicopter accidents (88 deaths, 29 serious injuries, 42 minor injuries) and 127 helicopter air ambulance accidents (126 deaths, 50 serious injuries, 42 minor injuries) between 1994 and 2008 involved causal factors that are addressed in the proposal.

Along with requiring a load manifest for all part 135 operations, the proposal defines the role and training of operations control specialists for helicopter air ambulance operations. They will perform safety-sensitive functions "such as providing pre-flight weather assessment, assisting with fuel planning, alternate airport weather minima, and communicating with pilots regarding operational concerns during flight. These duties are similar to those of an aircraft dispatcher, and therefore," the rule states, "operations control specialists would be subject to the restrictions on drug and alcohol use, and to a certificate holder's drug and alcohol testing program as described in 14 CFR part 120." It says they would require training and testing on weather, navigation, flight-monitoring procedures, air traffic control procedures, aircraft systems, aircraft limitations and performance; and, more frequently, on topics specific to each certificate holder, such as aviation regulations and operations specifications, crew resource management, and the local flying area.

Product Showcase

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Full Line of Defense Against Combustible Dust Nilfisk

    Nilfisk provides a comprehensive range of industrial vacuums meticulously crafted to adhere to NFPA 652 housekeeping standards, essential for gathering combustible dust in Class I, Group D, and Class II, Groups E, F & G environments or non-classified settings. Our pneumatic vacuums are meticulously engineered to fulfill safety criteria for deployment in hazardous surroundings. Leveraging advanced filtration technology, Nilfisk ensures the secure capture of combustible materials scattered throughout your facility, ranging from fuels, solvents, and metal dust to flour, sugar, and pharmaceutical powders. Read More

Featured

Artificial Intelligence