The CSE Corp. SR-100 primarily uses a chemical process to generate a 60-minute supply of oxygen.

CSE Corporation Expands SR-100 Alert

The self-contained self-rescuer unit used by underground miners generates 60 minutes of oxygen when started, but the company's investigation suggests start-up oxygen cylinders may fail in any field-deployed unit.

MSHA posted a May 10 update from CSE Corporation on its site that warns CSE customers about possible failure of any field-deployed SR-100 self-contained self-rescuer unit. Carried by underground miners for quick use in an emergency, the units use a chemical process to generate 60 minutes of oxygen when started. CSE's update, however, says the company's investigation suggests start-up oxygen cylinders may fail in any field-deployed unit.

CSE (600 Seco Road, Monroeville, PA 15146, 800-245-2224) said it is possible "the breathing bag in an affected SR-100 unit may receive less than the optimum amount of oxygen necessary for full inflation, if the unit is started with the oxygen cylinder. . . . Until the root cause can be identified, we must assume that the potential for start-up oxygen cylinders to fail may extend to any field deployed unit, and not just the serial numbers that were previously identified. CSE is continuing to investigate. Pending final resolution, CSE is notifying all customers of procedures to be followed if there is any question about unit activation. If for any reason a unit does not inflate the breathing bag, the user should don another unit if one is readily available. If a second unit is not readily available, the manual start should be used."

The initial notice about the problem, published in February 2010, indicated NIOSH and MSHA were jointly investigating the problem, which at that point CSE had identified in one SCSR that delivered less than the expected amount of oxygen, but further analysis revealed as many as 4,071 units in one lot may have had the oxygen starter problem.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

  • HAZ LO HEADLAMPS

    With alkaline or rechargeable options, these safety rated, Class 1, Div. 1 Headlamps provide long runtime with both spot and flood options in the same light. Work safely and avoid trip hazards with flexible hands-free lighting from Streamlight. Read More

Featured

Artificial Intelligence