U.S. Department of Labor Cites Dredging Manufacturer after Investigation into Worker’s Death

U.S. Department of Labor Cites Dredging Manufacturer after Investigation into Worker’s Death

OSHA investigation finds that safety procedures could have prevented the tragedy.

On January 27, 2021 a preventable death took place in Mobile, AL. A 22-year-old, who was new on the job, died from a crane bridge accident 30 feet in the air. He was caught in the crane trolley’s drive shaft. Federal inspectors say this tragedy could have been prevented. A part of the five-man team employed by SPI/Mobile Pulley Works Inc. to repair a 50-ton hoist, the Alabama resident was guiding a heavy steel cable to ensure workers were removed from the structure of the crane or out of its path when it was operating.

According to a press release, OSHA’s inspection led to 11 serious and two other-than-serious violations for the Mobile-based dredging manufacturer. Inspectors found the company failed to provide a workplace free from hazards and exposed employees to caught-in and crushed-by hazards that would most likely cause death or serious harm. The press release states, OSHA identified the following violations:

  • Allowed employees to work near unguarded equipment, which exposed them to struck-by and caught-in hazards
  • Failed to conduct periodic inspections of the crane
  • Exposed workers to respiratory hazards by requiring employees to wear half-mask negative pressure respirators without proper fit tests and did not provide training on respirator use to minimize the number of employees exposed to respirable crystalline silica
  • Failed to provide proper training on fall protection systems, exposing workers to fall hazards
  • Failed to inspect alloy steel chain slings used for rigging

OSHA proposed $89,141 in penalties.

“Heavy industrial work can be hazardous and employers must follow workplace safety standards to avoid serious injuries and, in this case, tragedy,” said OSHA Area Director Jose A. Gonzalez in Mobile, Alabama. “The terrible loss for this young man’s family and friends is deepened by the knowledge that this incident could have been prevented.”

Learn more about crane, derrick and hoist safety, fall and respiratory protection.

About the Author

Shereen Hashem is the Associate Content Editor for Occupational Health & Safety magazine.

Download Center

  • The Ultimate Guide to OSHA Recordkeeping

    When it comes to OSHA recordkeeping, there are always questions regarding the requirements and in and outs. This guide is here to help!

  • Lone Worker Safety Guide

    As organizations digitalize and remote operations become more commonplace, the number of lone workers is on the rise. These employees are at increased risk for unaddressed workplace accidents or emergencies. This guide was created to help employers better understand common lone worker risks and solutions for lone worker risk mitigation and incident prevention.

  • Online Safety Training Buyer's Guide

    Thinking of getting an online safety training solution at work but not sure how to evaluate different solutions and find the one that's best for your company? Use this handy buyer's guide to learn the basics of selecting online safety training and how to use it at your workplace.

  • SDS Software Buyer's Guide

    Whether this is your first time shopping for online SDS software or you’re upgrading from a legacy solution, this guide is designed for you to use in your search for the safety management solution that works best for you and your company.

  • Risk Matrix Guide

    Risk matrices come in many different shapes and sizes. Understanding the components of a risk matrix will allow you and your organization to manage risk effectively.

  • Vector Solutions

OH&S Digital Edition

  • OHS Magazine Digital Edition - November December 2021

    November December 2021


      How to Streamline Gas Detector Maintenance
    • OSHA TOP 10
      OSHA's Top 10 Most Frequently Cited Standards for FY 2021
      How PPE Can Help You Deal with the Harsh Condition of Winter
      Tackling Hearing Protection in the Workplace
    View This Issue