California Sees Rise in Worker Deaths in 2018 Stats

There has been a reported increase in worker deaths in the state of California according to most recent data from 2018.

The California Department of Industrial Relations (DIR) just reported an increase in worker deaths from years past. In 2018, 422 workers in the state died on the job compared to 376 in 2017, 388 in 2016, and 344 in 2014.

“These workers who lost their lives on the job in California serve as a reminder that we need to do everything possible to keep workplaces safe,” said Douglas Parker, chief of the Division of Occupational Safety and Health (Cal/OSHA).

An increase in worker deaths is always a concern for a state’s health and safety departments. The Cal/OSHA department reports it is looking into the data to best “bolster and direct [its] enforcement and education efforts,” said Parker.

Overall, California’s rate of fatal workplace incidents per 100,000 workers remains stable, with minor fluctuations since 2008. The state’s rate has consistently been lower than the national average. For 2018, the national fatal injury rate was 3.5 per 100,000 full-time workers, and California’s was just 2.3.

However, some demographics of people are more affected than others. Cal/OSHA has expressed concern at the percentage of Latino deaths reported each year—43 percent in 2018. DIR reiterated that it is committed to workplace safety outreach and education efforts—especially with a focus on high-hazard in the case of monolingual, non-English-speaking workers.

Of the 422 work-related fatalities in California in 2018, 155 of those resulted from transportation incidents and 62 from workplace homicides.

California is not the only place seeing a rise in workplace fatalities, however. The American Society of Safety Professionals (ASSP) and the National Safety Council (NSC) have noted a national rise in work-related fatalities, and there is growing concern.

“With the innovative tools available to today’s employers nationwide, it’s concerning that we’re continuing to see higher numbers of worker fatalities,” ASSP President Diana Stegall said in a statement.
“Most occupational incidents are preventable given today’s technologies and proven safety and health strategies,” Stegall said.

Work-related motor vehicle crashes and falls still remain the leading cause of preventable death on the job, but drug and alcohol overdoses are growing workplace threats. For the sixth consecutive year, overdoses from nonmedical use of drugs or alcohol increased overall, leading to 305 deaths in 2018—compared with 272 the previous year.

Work-related motor vehicle deaths did decline, totaling 1,276 in 2018 (from 1,299 in 2017)—according to the NSC. Falls to a lower level also decreased to 615 in 2018 (compared to 713 the year prior).

The NSC encouraged employers to take a systematic approach to safety, such as implementing policies, training, and risk assessment techniques, to address major causes of fatalities and injuries.

Download Center

HTML - No Current Item Deck
  • Safety Management Software - Free Demo

    IndustrySafe Safety Software’s comprehensive suite of modules help organizations to record and manage incidents, inspections, hazards, behavior based safety observations, and much more. Improve safety with an easy to use tool for tracking, notifying and reporting on key safety data.

  • What is Behavior Based Safety?

    Learn the ins and outs of Behavior Based Safety (BBS), a process that informs management and employees of the overall safety of the workplace through safety observations.

  • How to Properly Use Job Safety Observations

    While there are many pros and cons of behavior based safety programs, often times these programs fail because of poor implementation. Learn how to properly use safety observations that result in improvement.

  • The 4 Stages of an Incident Investigation

    So, your workplace has just experienced an incident resulting in the injury or illness of a worker. Now what? OSHA recommends that you conduct investigations of workplace incidents using a four-step system.

  • Levels of a Risk Matrix:

    Risk matrices come in many different shapes and sizes. In the following blog article, we break down the three most popular sizes of a risk matrix — 3x3, 4x4, and 5x5 — and reveal the pros and cons of each.

  • Industry Safe

OH&S Digital Edition

  • OHS Magazine Digital Edition - March 2020

    March 2020

    Featuring:

    • HUMAN FACTORS
      The Case for Managing Human Factors at Heights
    • DRUG TESTING
      An Overview of SAMHSA'S New Oral Fluid Testing Guidelines
    • HAND PROTECTION
      Cutting to the Chase
    • PROTECTIVE APPAREL
      Choosing the Right Protective Clothing
    View This Issue