Headphones Music on Construction Sites Is Up to Employer Discretion, says OSHA

OSHA responded to employers’ question about the use of headphones to listen to music on construction sites: there is no rule prohibiting headphone use, but there are identified hazards and risks employers should consider.

Music is integral to our lives. We listen to it on the way to and from work, while doing the dishes, at parties, and even on the job. However, there are arguably some jobs where listening to music through headphones could cause more harm than good. Employers in the construction industry asked OSHA about the regulations and recommendations the organization had about music headphones on site.

In September of 2019, OSHA responded to employers’ questions regarding the hazards behind headphones for music on construction sites with a letter of interpretation. One employer noted that some headphones were advertised as “OSHA approved” and wanted to know if the organization had any regulations related to the product(s). OSHA said that while it does not have a regulation that prohibits the use of headphones, the letter outlines many hazards and issues employers should consider if they allow the use of music headphones on site.

The letter first noted the existence of OSHA construction standards regarding noise exposure limits—and that, if those limits are exceeded, the employee must provide hearing protection to reduce noise levels below the exposure limits. OSHA made clear that music players and music headphones are not appropriate substitutes for hearing protection.

Next, the letter stated that headphones may be allowed at the employer’s discretion, but employers need to consider whether the use “creates or augments other hazards apart from noise.”

By this OSHA means that the use of headphones might interfere with a worker’s awareness to other onsite hazards, especially struck-by hazards. OSHA states that employers must make sure that employees “are not exposed to struck-by hazards while performing their work. Listening to music may produce a safety hazard by masking environmental sounds that need to be heard, especially on active construction sites where attention to moving equipment, heavy machinery, vehicle traffic, and safety warning signals may be compromised.”

Lastly, OSHA cleared the air on the reported “OSHA approved” headphones saying “OSHA does not register, certify, approve, or otherwise endorse commercial or private sector entities, products, or services.”

The key takeaway? Employers are ultimately responsible for making the decision on whether or not to allow music headphones on construction sites. If the use of headphones would expose employees to potential hazards, like struck-by hazards, employers could still be liable for a violation of the general duty clause.

Read the National Law Review’s article on the topic for more information.

Download Center

HTML - No Current Item Deck
  • Safety Management Software - Free Demo

    IndustrySafe Safety Software’s comprehensive suite of modules help organizations to record and manage incidents, inspections, hazards, behavior based safety observations, and much more. Improve safety with an easy to use tool for tracking, notifying and reporting on key safety data.

  • The Top 5 Safety and Technology Trends to Watch in 2020

    Get the latest on trends you can expect to hear more about in 2020, including continued growth of mobile safety applications, wearable technology, and smart PPE; autonomous vehicles; and increased adoption of international safety standard, ISO 45001.

  • Get the Ultimate Guide to OSHA Recordkeeping

    OSHA’s Form 300A posting deadline is February 1! Are you prepared? To help answer your key recordkeeping questions, IndustrySafe put together this guide with critical compliance information.

  • The 4 Stages of an Incident Investigation

    So, your workplace has just experienced an incident resulting in the injury or illness of a worker. Now what? OSHA recommends that you conduct investigations of workplace incidents using a four-step system.

  • Why Is Near Miss Reporting Important?

    A near miss is an accident that's waiting to happen. Learn how to investigate these close calls and prevent more serious incidents from occurring in the future.

  • Industry Safe
comments powered by Disqus

OH&S Digital Edition

  • OHS Magazine Digital Edition - November December 2019

    November / December 2019

    Featuring:

    • GAS DETECTION
      Redefining Compliance for the Gas Detection Buyer
    • FALL PROTECTION
      Don't Trip Over the Basics
    • VISION PROTECTION
      What to Look for in Head-to-Toe PPE Solutions
    • PROTECTIVE APPAREL
      Effective PPE for Flammable Dust
    View This Issue