Air Quality Standards for Lead Tightened for First Time in 30 Years

The Environmental Protection Agency tightened air quality standards for lead on Thursday, reducing the standard from 1.5 micrograms of lead per cubic meter of air to .15 micrograms. The agency decreased the National Ambient Air Quality Standard on lead for the first time in 30 years.

"America's air is cleaner than a generation ago," said EPA Administrator Stephen L. Johnson. "With these stronger standards a new generation of Americans are being protected from harmful lead emissions."

The EPA strengthened the standards after a thorough review of the science on lead, advice from the Clean Air Scientific Advisory Committee, and consideration of public comments. The previous standards, set in 1978, were 1.5 ug/m3.

EPA's action sets two standards: a primary standard at 0.15 ug/m3 to protect health and a secondary standard at the same level to protect the public welfare, including the environment.

The existing monitoring network for lead is not sufficient to determine whether many areas of the country would meet the revised standards. EPA is redesigning the nation's lead monitoring network, which is necessary for the agency to assess compliance with the new standard.

The new rule will modify existing requirements for ambient air lead monitoring networks. One new requirement mandates the states to establish ambient air monitors near sources that release more than one ton of lead per year including smelters, iron and steel foundries and battery manufacturers. It also establishes monitoring in population centers of more than 500,000.

No later than October 2011, EPA will designate areas that must take additional steps to reduce lead air emissions. States have five years to meet these new standards after designations take effect.

More than 6,000 studies since 1990 have examined the effects of lead on health and the environment. Some studies have linked exposure to low levels of lead with damage to children's development, including IQ loss.

Lead emissions have dropped nearly 97 percent nationwide since 1980, largely the result of the agency's phase-out of lead in gasoline. Average levels of lead in the air today are far below the 1978 standards. Lead in the air comes from a variety of sources, including smelters, iron and steel foundries, and general aviation gasoline. More than 1,300 tons of lead are emitted to the air each year, according to EPA's most recent estimates.

For more information about lead in air visit: epa.gov/air/lead

Product Showcase

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

Featured

Artificial Intelligence

Webinars