PPE


One of the most important prevention tactics your staff can use in the fight against MRSA is frequent and effective hand washing.

MRSA In the Office

By focusing proper cleaning on surfaces in the office that get more hand attention, health-based cleaning services target potentially contaminated surfaces that can harbor MRSA and other harmful pathogens.

A scene from the entrance to the 2009 Expo that took place in San Antonio.

VPPPA Prepares for its Most Prominent, Prestigious Powwow

Last year's event in San Antonio, Texas (pictured), drew 2,836 attendees representing all areas and professions affiliated with the safety and health industry. For this year's conference in Orlando, organizers are expecting to up that number to at least 3,000.

Two Weeks Left to Apply for Safe-in-Sound Awards

Sept. 1 is the deadline to apply for the 2011 awards from NIOSH and the National Hearing Conservation Association.

Metal Polishing Plant Cited for Willfully Overexposing Worker to Chromium VI

In addition, OSHA issued the company 50 serious and two other-than-serious violations for failing to provide proper protective equipment for employees working with lead and other extremely dangerous dust and chemicals, and failing to develop or implement a hazard communication program, among other things.

Ultrafine Particles Could Increase Coronary Risk in Firefighters

Coronary events are a major health issue in firefighters, causing nearly half of all deaths on duty. Exposure to ultrafine particles could contribute to coronary disease in firefighters—not only as a long-term health risk, but also as a cause of coronary events while responding to fires.

Honeywell's Purchase of Sperian Halfway Home

The acquisition of Sperian shares held by Essilor International, Ginette Dalloz, and Societe Civile Familiale Dalloz means the current tender offer until Sept. 2 remains on track.

Through July 31, 2010, 48 firefighters had died in the line of duty, according to the U.S. Fire Administration.

Mining, Firefighter Deaths at High Levels

Total mining deaths through July 30 stood at 53, the highest number since 2007, and 48 U.S. firefighters had died in the line of duty as of July 31.

Meat, Poultry, Egg Inspectors Getting PPE Donning, Doffing Time

USDA's Food Safety and Inspection Service is taking comments until Sept. 8 on the proposed addition, which is based on the 2005 U.S. Supreme Court decision in IBP, Inc. v. Alvarez and Office of Personnel Management guidance.



Since the fire season began, about 1.7 million acres have burned.

Russia May Revise Current Fire Safety Program

EMERCOM, the agency that includes the Russian State Fire Service, reported 129,161 people and 19,343 pieces of apparatus were fighting the 589 fires active on Aug. 5 in the country.

NY Concrete Firm Fails to Abate, Receives $210K Fine

The company's "refusal to honor the requirements of this agreement reflects an irresponsible approach to worker safety and health, leaving workers vulnerable to injuries and possible fatalities," said Robert Kulick, OSHA's regional administrator in New York. "This situation is unacceptable and will not be tolerated."

Australia Considers Control Banding for Nanomaterials

A report released Aug. 2 by Safe Work Australia evaluates two possible approaches for using control banding to ensure safety when working with nanomaterials but admits workplaces there have little knowledge of it.

This photo shows relatives grieving for Ma Xianqian, a Foxconn employee who committed suicide.

Global Electronics Factories In Spotlight

Recently, a model of genuine worker participation has surprisingly emerged in China.

Aircraft Parts Plant Cited for 44 Violations in Connecticut

Among the wide range of dangers inspectors listed were the risk of laceration, amputation, or crushing injuries; electrical hazards; fire and explosion hazards stemming from combustible dust; improper storage of flammable liquids; and insufficient monitoring of exmployees’ exposure to hexavalent chromium.

Drive-by Inspection Results in $60,000 in Fines for Builder

"While it is fortunate that no one was injured here, good luck is never an acceptable worker safeguard,” said Patrick Griffin, OSHA's area director for Rhode Island. “For the safety and well-being of its workers, this employer must take effective, ongoing action to prevent these hazards from recurring."

Foundations of Hand Protection

The next time someone at your facility experiences a destructive hand injury, advise all department managers of the status of the injury and the costs associated. Tie it to their bonus pay.

The question is whether welders in the field should have control over the power coming out of the welding machine.

Advancing Stick Welding Safety

Why are stick welding machine conductors allowed to lie around with power on them all the time? The only answer that seems to ring true is that it has always been that way.

Follow the necessary PPE requirements, such as wearing insulating rubber gloves with leather protectors that are properly selected for the task.

Electrical Safety First

What can we do to prevent or minimize these incidents? The simple answer is training and increased awareness.

FR Clothing: Important Tool as OSHA Expectations Get Tougher

With criminal penalties associated with safety regulation looming, many corporate safety professionals are opting to spread worker protection more broadly across their workforces.

Hazmat Training: Preparing for the Worst

At the specialist level, trainees are expected to don and doff a hazmat suit. For some, this can bring out anxieties that range from fear of suit entrapment to decreased mobility or visibility.

Best Practices 101

The misconception of welding's being a dangerous occupation is largely due to welders who made careless mistakes by not being aware of or not following the recommended safety procedures and protocols.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

Featured

Artificial Intelligence

Webinars