PPE


Commercial Diving, Disorientation Hazards Lead to Firm's $83,160 Fine

OSHA cited Trenton, N.J.-based IEW Construction Group Inc. for 12 serious safety violations found while the company was doing repair work on the Alexander Road Bridge in Princeton, N.J.

Worker's Chain Saw Injury Leads to $153,600 Penalty

Three willful violations with penalties of $147,000 involve not providing protective leg coverings and eye or face shields to employees who operated chain saws, and not providing hard hats to employees working on the ground under trees.

OSHA Delivers $76,005 in Fines to Delaware Distributor

Some of the serious violations involve exposing employees to electrical hazards due to the company's failure to properly mark voltage panel boxes, properly guard voltage junction boxes, and cover live electrical parts.

FEMA Adds a Week to AFG Application Period

Because Hurricane Irene affected so many communities on the East Coast, FEMA extended the deadline. Sept. 16 at 5 p.m. EDT is the new deadline to apply for Assistance to Firefighters Grants.

Federal Agencies Showcase First Responder Technologies

The 12th annual Technologies for Critical Incident Preparedness Conference and Expo highlighted Defense, Justice, and Homeland Security technologies and training tools currently available and being developed for the emergency response community.

Coming Out of the Fog

Are you seeing all of the barriers to protective eyewear compliance?

MSDS Evolution: From Document to Data to Globalization

Some may assume that the lion's share of the responsibility is upstream, but downstream employers are not exempt.

Do You Know How Badly Your Contractors Can Hurt You?

What training have they had? Are they qualified to the NFPA 70E standard and to 29 CFR 1910.332, 1910.333, and 1910.269?



Worker training is probably one of the most cost-effective requirements to effectively reduce risk. (Photo: Square D Services/Schneider Electric)

Managing Risk as a Fundamental Business Process

Electrical workplace safety deficiencies are among the top 10 violations most frequently cited by OSHA.

Sights for Sore Eyes

If injury potential is so predictable, why are employees so surprised when they are injured? Eye injuries may be predictable, but the exposures are not always apparent.

Fall Conference Season in Full Swing

The calendar is full of big meetings from early September to mid-December, including VPPPA, NSC, A+A, the IFMA World Workplace 2011, and NFPA's Fire & Life Safety Conference.

Serious Safety Violations Add Up to $60,900 in Fines for Ohio Firm

Violations include failing to provide machine guards on a bandsaw blade, allowing aluminum dust to collect in the shot blast machine, and failing to implement explosion protection measures for equipment and exhaust ventilation systems.

OHS New Product of the Year Award Winners Announced

Take a look at the entire list of winners of the 2011 New Product of the Year awards.

Construction Fatalities Fell Nearly 10 Percent Last Year

The number of construction fatalities in 2010 was 751, down from 834 in 2009 and 1,239 in 2006.

Laceration, Fire Hazards Add Up to $49,210 in Fines for N.Y. Manufacturer

Eight serious violations involve a storage cabinet for flammable liquids that did not meet fire resistance requirements, an auger that did not have its power source locked out to prevent its activation while employees cleared jams, and blocked and unmounted fire extinguishers.

Worker Fatally Crushed on Oil Rig, Firm Fined $132,300

OSHA's Baton Rouge Area Office began its inspection March 10 following a report that an employee was fatally injured when a land-based portable rig, which was mounted on a barge, tipped over and crushed the employee to death.

Presentations Highlight FRI 2011 Program

This year's Fire-Rescue International conference put on by the International Association of Fire Chiefs gets rolling Aug. 26 at Atlanta's Georgia World Congress Center.

OSHA Tosses Salad Maker $51,000 in Penalties for Repeat Violations

Two repeat violations with penalties of $30,000 involve to the company's failure to ensure workers were wearing safety glasses and ensure the proper level of compressed air was used for cleaning food particles.

Sensear's Growth Continues

Five years after the company was founded, it has landed a deal with the U.S. Marine Corps that opens more opportunities with the U.S. military, CEO Justin Miller says.

Upcoming OH&S Virtual Event Approved for CM Points

ABIH has approved the Aug. 31 event for 0.67 Industrial Hygiene Certification Maintenance (CM) points.

Product Showcase

  • Safety Shower Test Cart

    The Safety Shower Test Cart speeds up and simplifies emergency shower tests, ensures you stay in compliance with OSHA regulations, and significantly reduces testing costs. With 7 unique features, the cart makes testing easy, effective, and efficient. You can test water clarity, flow, temperature, and spread—all at the same time! Most safety shower testing kits create a mess, take too much time to use, and don't fully help you stay in compliance with OSHA & ANSI standards. Transform the way you test emergency showers with Green Gobbler Safety. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 Read More

Featured

Artificial Intelligence