PPE


ASSE Announces New Prevention-Through-Design Standard

The Z590.3 standard focuses specifically on the avoidance, elimination, reduction, and control of occupational safety and health hazards and risks in the design and redesign process.

Many Iraq/Afghanistan War Veterans Need Lung Function Testing: ACOEM

The researchers suggest a number of possible explanations for lung injury in soldiers with IAW-LI, such as inhaling sharp and coarse dust grains, toxins, and allergens in the in the harsh, polluted combat environment.

CDC Tracking Growth in Chemical Suicides

An ATSDR analysis identified 10 incidents during 2006-2010 in six states. Nine people died and four law enforcement officers -- none of whom was wearing PPE when exposed -- were injured.

Party Rental Firm Fined $154,000 for Plethora of Safety Violations

Two willful violations involve failing to train employees in the use of powered industrial trucks and causing a potential electrocution hazard by providing damaged extension cord sets to be used in wet locations without ground fault circuit interruption protection.

MSA Appoints New Global Product Leader

Dr. Thomas Muschter most recently was R&D director for MSA's International business segment. He repleaces Ronald N. Herring, who on Nov. 1 will assume the role of president of MSA International, Western Europe Zone and Middle Eurasia Zone.

NFPA Cites Safety Improvements Rising from 9/11

Communications and interoperability for emergency responders, high-rise building safety, and emergency preparedness have improved as "a direct outgrowth of 9/11, and each is central to that event's legacy of safety," NFPA Journal Staff Writer Fred Durso Jr. reports.

Commercial Diving, Disorientation Hazards Lead to Firm's $83,160 Fine

OSHA cited Trenton, N.J.-based IEW Construction Group Inc. for 12 serious safety violations found while the company was doing repair work on the Alexander Road Bridge in Princeton, N.J.

Worker's Chain Saw Injury Leads to $153,600 Penalty

Three willful violations with penalties of $147,000 involve not providing protective leg coverings and eye or face shields to employees who operated chain saws, and not providing hard hats to employees working on the ground under trees.



OSHA Delivers $76,005 in Fines to Delaware Distributor

Some of the serious violations involve exposing employees to electrical hazards due to the company's failure to properly mark voltage panel boxes, properly guard voltage junction boxes, and cover live electrical parts.

FEMA Adds a Week to AFG Application Period

Because Hurricane Irene affected so many communities on the East Coast, FEMA extended the deadline. Sept. 16 at 5 p.m. EDT is the new deadline to apply for Assistance to Firefighters Grants.

Federal Agencies Showcase First Responder Technologies

The 12th annual Technologies for Critical Incident Preparedness Conference and Expo highlighted Defense, Justice, and Homeland Security technologies and training tools currently available and being developed for the emergency response community.

Coming Out of the Fog

Are you seeing all of the barriers to protective eyewear compliance?

MSDS Evolution: From Document to Data to Globalization

Some may assume that the lion's share of the responsibility is upstream, but downstream employers are not exempt.

Do You Know How Badly Your Contractors Can Hurt You?

What training have they had? Are they qualified to the NFPA 70E standard and to 29 CFR 1910.332, 1910.333, and 1910.269?

Worker training is probably one of the most cost-effective requirements to effectively reduce risk. (Photo: Square D Services/Schneider Electric)

Managing Risk as a Fundamental Business Process

Electrical workplace safety deficiencies are among the top 10 violations most frequently cited by OSHA.

Sights for Sore Eyes

If injury potential is so predictable, why are employees so surprised when they are injured? Eye injuries may be predictable, but the exposures are not always apparent.

Fall Conference Season in Full Swing

The calendar is full of big meetings from early September to mid-December, including VPPPA, NSC, A+A, the IFMA World Workplace 2011, and NFPA's Fire & Life Safety Conference.

Serious Safety Violations Add Up to $60,900 in Fines for Ohio Firm

Violations include failing to provide machine guards on a bandsaw blade, allowing aluminum dust to collect in the shot blast machine, and failing to implement explosion protection measures for equipment and exhaust ventilation systems.

OHS New Product of the Year Award Winners Announced

Take a look at the entire list of winners of the 2011 New Product of the Year awards.

Construction Fatalities Fell Nearly 10 Percent Last Year

The number of construction fatalities in 2010 was 751, down from 834 in 2009 and 1,239 in 2006.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

Featured

Artificial Intelligence

Webinars