PPE


Commercial Diving, Disorientation Hazards Lead to Firm's $83,160 Fine

OSHA cited Trenton, N.J.-based IEW Construction Group Inc. for 12 serious safety violations found while the company was doing repair work on the Alexander Road Bridge in Princeton, N.J.

Worker's Chain Saw Injury Leads to $153,600 Penalty

Three willful violations with penalties of $147,000 involve not providing protective leg coverings and eye or face shields to employees who operated chain saws, and not providing hard hats to employees working on the ground under trees.

OSHA Delivers $76,005 in Fines to Delaware Distributor

Some of the serious violations involve exposing employees to electrical hazards due to the company's failure to properly mark voltage panel boxes, properly guard voltage junction boxes, and cover live electrical parts.

FEMA Adds a Week to AFG Application Period

Because Hurricane Irene affected so many communities on the East Coast, FEMA extended the deadline. Sept. 16 at 5 p.m. EDT is the new deadline to apply for Assistance to Firefighters Grants.

Federal Agencies Showcase First Responder Technologies

The 12th annual Technologies for Critical Incident Preparedness Conference and Expo highlighted Defense, Justice, and Homeland Security technologies and training tools currently available and being developed for the emergency response community.

Coming Out of the Fog

Are you seeing all of the barriers to protective eyewear compliance?

MSDS Evolution: From Document to Data to Globalization

Some may assume that the lion's share of the responsibility is upstream, but downstream employers are not exempt.

Do You Know How Badly Your Contractors Can Hurt You?

What training have they had? Are they qualified to the NFPA 70E standard and to 29 CFR 1910.332, 1910.333, and 1910.269?



Worker training is probably one of the most cost-effective requirements to effectively reduce risk. (Photo: Square D Services/Schneider Electric)

Managing Risk as a Fundamental Business Process

Electrical workplace safety deficiencies are among the top 10 violations most frequently cited by OSHA.

Sights for Sore Eyes

If injury potential is so predictable, why are employees so surprised when they are injured? Eye injuries may be predictable, but the exposures are not always apparent.

Fall Conference Season in Full Swing

The calendar is full of big meetings from early September to mid-December, including VPPPA, NSC, A+A, the IFMA World Workplace 2011, and NFPA's Fire & Life Safety Conference.

Serious Safety Violations Add Up to $60,900 in Fines for Ohio Firm

Violations include failing to provide machine guards on a bandsaw blade, allowing aluminum dust to collect in the shot blast machine, and failing to implement explosion protection measures for equipment and exhaust ventilation systems.

OHS New Product of the Year Award Winners Announced

Take a look at the entire list of winners of the 2011 New Product of the Year awards.

Construction Fatalities Fell Nearly 10 Percent Last Year

The number of construction fatalities in 2010 was 751, down from 834 in 2009 and 1,239 in 2006.

Laceration, Fire Hazards Add Up to $49,210 in Fines for N.Y. Manufacturer

Eight serious violations involve a storage cabinet for flammable liquids that did not meet fire resistance requirements, an auger that did not have its power source locked out to prevent its activation while employees cleared jams, and blocked and unmounted fire extinguishers.

Worker Fatally Crushed on Oil Rig, Firm Fined $132,300

OSHA's Baton Rouge Area Office began its inspection March 10 following a report that an employee was fatally injured when a land-based portable rig, which was mounted on a barge, tipped over and crushed the employee to death.

Presentations Highlight FRI 2011 Program

This year's Fire-Rescue International conference put on by the International Association of Fire Chiefs gets rolling Aug. 26 at Atlanta's Georgia World Congress Center.

OSHA Tosses Salad Maker $51,000 in Penalties for Repeat Violations

Two repeat violations with penalties of $30,000 involve to the company's failure to ensure workers were wearing safety glasses and ensure the proper level of compressed air was used for cleaning food particles.

Sensear's Growth Continues

Five years after the company was founded, it has landed a deal with the U.S. Marine Corps that opens more opportunities with the U.S. military, CEO Justin Miller says.

Upcoming OH&S Virtual Event Approved for CM Points

ABIH has approved the Aug. 31 event for 0.67 Industrial Hygiene Certification Maintenance (CM) points.

Product Showcase

  • Preventative Heat Safety

    Dehydration and heat exposure impair physical and cognitive performance. Proper hydration boosts heat stress resilience, but hydration needs are highly individualized and hard to predict across a workforce. Connected Hydration® empowers industrial athletes to stay safe through behavioral interventions, informed by sports science, and equips safety teams with critical insights to anticipate high-risk situations and adapt to evolving environmental factors. Curious about applying the latest in sports science based hydration strategies for industrial athletes? Stop by booth #1112 at AIHA or schedule a free demo today at https://epcr.cc/demo. Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

Featured

Artificial Intelligence