PPE


NIOSH Study Shows Scope of Illness Tied to Two Common Herbicides

Although most of the illnesses related to paraquat and diquat were low to moderately severe—health effects commonly included skin, eye, or neurological symptoms—these two herbicides make up 85 percent of herbicide-related deaths in the United States.

Foot Injury Results in Citations

The Pennsylvania company notified OSHA last August that an employee suffered a double toe amputation when he lost control of a lawn mower he was operating on a wet, grassy slope; this happened less than three months after OSHA investigated another rollover incident in which an employee sustained serious injuries and was hospitalized, according to the agency.

NIOSH Study Pinpoints Industries with Hearing Problems

NIOSH reports that hazardous noise affects approximately 22 million U.S. workers. This study is the first to report prevalence estimates for tinnitus by U.S. industry sector and occupation and provide these estimates side by side with prevalence estimates of hearing difficulty, according to the agency.

Three things workers and safety managers should do to prevent injuries are to know the eye safety hazards at work by completing a hazard assessment, eliminating the hazards through engineering controls before starting work, and wearing appropriate vision protection.

Keys to Preventing Eye Injuries

Prevent Blindness America reports that 90 percent of the more than 2,000 eye injuries occurring each day are preventable through the use of protective safety eyewear.

Hand washing alone is not enough. To keep hands strong and healthy, employees should use protect and restore creams before and after working.

Help Protect Hard-Working Hands from Occupational Skin Disorders

Just one case of occupational dermatitis can cost an employer approximately $3,500 in workers' compensation claims and an average disability of 23.9 days, according to the Journal of the American Medical Association.

NFPA 70E-2015 specifically defines ear canal inserts (ear plugs) as the required protection in all arc flash zones.

Get Acquainted With EU Safety Glove Standards

The classification of a glove in a particular test is usually defined as one of a series of performance levels. It is left to the user, following a suitable risk assessment exercise, to select a glove with a suitable profile.

Instead of a one-size-fits-all approach, an ESLI allows cartridge change-outs to occur based on each employee’s individual work hours, exposure levels, and breathing rates while also factoring in different environmental conditions. (3M Personal Safety Division photo)

Common Questions Safety Managers Ask About Using ESLIs for Organic Vapors

End-of-service-life indicators have the potential to help organizations minimize lost time, reduce workers' compensation costs, and help save on equipment costs.

OSHA Cites Plastics Manufacturer After Severe Worker Injuries

Two employees suffered debilitating hand injuries, according to the agency.



OSHA: Serial Violator Exposes Employees to Fall Hazards

High & Dry Roofing faces $152,460 in proposed penalties from OSHA and now is in the agency's Severe Violator Enforcement Program.

Ankle guards should be another box to put on the checklist when choosing appropriate footwear. (D30® photo)

Footwear That Goes the Extra Mile

Assessing the credibility of a brand is just as important as looking at the durability of the product.

Having the right percentage mix and orientation of hydrophilic and hydrophobic within an FR fabric, combined with engineered breathability, is both the art and the science used to create high-performance next-to-skin clothing. (Polartec photo)

Comfort is the Key to FR Clothing Compliance

Employees should look professional in their work uniforms with clothing choices that offer the trifecta of good fit, good function, and that offer modern fashion so workers want to wear their FR clothing.

In the protective toe footwear industry, there are several delivery models to choose from. The most common are utilizing a local store, web ordering, and shoemobile.

If the Shoe Fits . . . .

Footwear certified as meeting ASTM F2413-11 must first meet the requirements of impact resistance and compression resistance. Then the requirements of additional sections can be met.

What matters most to the end user is the final product

Informed Workers Are Safer Workers: Science Is the Key to FR Technology

End users and wearers of flame-resistant garments should research FR fabrics and manufacturers to make sure they specify those fabrics from reputable suppliers that will meet their unique needs.

The occupations with the largest number of lost-time cut, laceration, and puncture injuries in 2013 included construction laborers.

Oregon OSHA Clarifies Policies on Temp Companies

A revised program directive contains inspection criteria that apply to temporary service providers and worker leasing companies.

Envelope Printing Facility Ignored Machine Safety Procedures: OSHA

OSHA has proposed more than $88,000 in fines.

OSHA: Metal Plating Company Exposes Workers to Noise, Toxic Metal Hazards

OSHA has proposed $157K in fines for the Illinois company.

Challenge III winners are developing new materials to reduce head impact forces on sports professionals, military members, and others who wear protective gear.

Head Health Challenge III Winners Named

This open competition was launched to encourage the development of advanced materials for absorbing or dissipating impact that can be used in protective gear, playing surfaces, and equipment for athletes, members of the military, and others. Each winning team gets $250,000 to advance their work in developing state-of-the-art materials.

Dow, DuPont Outline Merger Game Plan

DuPont's Safety & Protection unit is going to be included in one of three independent, publicly traded companies that DowDuPont -- the combined company -- will create through tax-free spin-offs, assuming the merger is completed as the companies intend.

Logging Company Cited for Exposing Workers to Safety Hazards

Ray Clearing Inc. has been fined more than $35,000 by OSHA.

Dollar Tree Settles OSHA Cases, Recalls Burn Relief Product

The settlement agreement with OSHA implements safeguards to protect workers at Dollar Tree stores nationwide from hazards associated with blocked emergency exits, obstructed access to exit routes, electrical equipment, and improper storage of materials. It commits Dollar Tree to pay $825,000 in penalties arising from 13 different inspections.

Product Showcase

  • Full Line of Defense Against Combustible Dust Nilfisk

    Nilfisk provides a comprehensive range of industrial vacuums meticulously crafted to adhere to NFPA 652 housekeeping standards, essential for gathering combustible dust in Class I, Group D, and Class II, Groups E, F & G environments or non-classified settings. Our pneumatic vacuums are meticulously engineered to fulfill safety criteria for deployment in hazardous surroundings. Leveraging advanced filtration technology, Nilfisk ensures the secure capture of combustible materials scattered throughout your facility, ranging from fuels, solvents, and metal dust to flour, sugar, and pharmaceutical powders. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence