PPE


Flash fires and fuel-fed fires are two different hazards, and it

Eight Things Oil & Gas Workers Should Know About Flash Fires

Flash fires and fuel-fed fires are two different hazards, and it's critical to distinguish between the two for various safety reasons.

The old standard had five ratings, but the new version nearly doubled it with a new scale of A1-A9. The change adds high-end levels, reflecting the influx of high-performance cut-resistant gloves in the marketplace. (Ansell photo)

ANSI/ISEA 105-2016 Regulation Updates

We're better equipped than ever before to provide hand protection to industrial workers. The biggest challenge is making sure regulations and standards around PPE and hand protection keep pace.

"The Colorado Convention Center is a great venue," said Dan McNeill, director of professional development at ASSE. "We

ASSE's Mile High Moment

This could be the most consequential annual conference for the society in many years.

Gloves and other rubber insulating products must be permanently marked to indicate the voltage class, and the gloves and sleeves must also have a color-coded label identifying the voltage class. (Saf-T-Gard International, Inc. photo)

Identify, Verify, and Comply: The Three Pillars of a Successful Electrical Safety Program

What's shocking is that many workers are not using rubber insulating equipment because they simply don't know they need it.

To help prevent eye injury, make sure your employees are wearing ANSI Z87+ impact resistant eyewear. (Radians, Inc. photo)

Your Eyes Are Amazing—They Deserve Quality PPE

When vision is impaired, quality of life and the ability to work experience a drastic and unfortunate decline. Preventing eye injuries should be a top task on every safety professional's to-do list.

NIOSH Touts DERMaL eToolkit to Aid Responders

They can quickly retrieve important information about chemicals' health effects while in the field, explains Naomi Hudson, DrPH, MPH, a health scientist in NIOSH's Education and Information Division.

MSHA Awards $250K in Grants

The money is part of the Brookwood-Sago grant program.

AIHA: Cannabis Industry Workers Need Protection

The association's The Synergist magazine explores PPE practices for the young industry.



Auto Insulation Manufacturer Faces Penalties Following Worker's Injury

The Ohio company has been cited for willful violations of machine safety procedures.

OSHA Looking for Potential Education Centers

The administration is seeking applications from nonprofit organizations interested in providing occupational safety and health classes.

The Washington State Convention Center is located in downtown Seattle and hosts AIHce 2017. (Washington State Convention Center photo)

Seizing on Seattle

The year's biggest U.S industrial hygiene show, AIHce EXP docks in the Emerald City next month.

Having a device that does not fit properly will force workers to remove the protection from their ears, thus exposing them to dangerous levels of noise at various points throughout their work shift. (Cotral Lab, Inc. photo)

How to Choose the Most Effective Hearing Protection?

Decision makers must consider that in many cases, workers have to wear hearing protection for eight hours.

NSF Launches Hearables Challenge

The contest seeks algorithms or methods for increasing the clarity of conversations in noisy settings.

NIOSH Highlights Noise Exposure of Wildland Firefighters

To prevent this population of firefighters from developing hearing loss, the authors recommend enrolling all wildland firefighters in a hearing conservation program and that fire agencies maintain fire service-specific hearing loss prevention programs.

Resources Available for Fourth Annual Stand-Down

NIOSH is making a number of resources available for all employers participating in this year's stand-down.

California Lab Approved as NRTL

Many OSHA standards require that an NRTL test and certify certain types of equipment as safe for use in workplaces. They are independent laboratories that meet OSHA's requirements for performing safety testing and certification of products.

NIOSH Requesting PPE Information from Facilities

The agency is requesting information about the environmental storage conditions.

Without proper foot support and cushioning you can endure tremendous strain on your muscles; the proper footwear and insoles can help to alleviate this strain. (MEGAComfort photo)

Taking Strides Toward Safety

You can use 100 percent dual layer memory foam insoles to alleviate pain and fatigue. Utilizing insoles in your shoes also prolongs the life of protective footwear.

Health effects of breathing welding fumes include eye, nose, and throat irritation; possible lung damage; various types of cancer; kidney and nervous system damage; and suffocation when oxygen-displacing gases are involved in welding in confined or enclosed spaces.

Welding Safety Best Practices

Welders must be protected from electric shock, welding fumes, fire, and injuries that can be caused by insufficient PPE.

Modern single use gloves incorporate a wide range of job-matched performance technologies. (SW Safety Solutions Inc. photo)

Understanding the Modern Single Use Glove

Glove construction now takes into account long-term usability to reduce finger fatigue, chronic skin conditions, and more troublesome musculoskeletal disorders.

Product Showcase

  • Preventative Heat Safety

    Dehydration and heat exposure impair physical and cognitive performance. Proper hydration boosts heat stress resilience, but hydration needs are highly individualized and hard to predict across a workforce. Connected Hydration® empowers industrial athletes to stay safe through behavioral interventions, informed by sports science, and equips safety teams with critical insights to anticipate high-risk situations and adapt to evolving environmental factors. Curious about applying the latest in sports science based hydration strategies for industrial athletes? Stop by booth #1112 at AIHA or schedule a free demo today at https://epcr.cc/demo. Read More

  • HAZ LO HEADLAMPS

    With alkaline or rechargeable options, these safety rated, Class 1, Div. 1 Headlamps provide long runtime with both spot and flood options in the same light. Work safely and avoid trip hazards with flexible hands-free lighting from Streamlight. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

Featured

Artificial Intelligence

Webinars