Top Stories


Both OSHA and the Canadian Standards Association have head protection standards designed to protect workers.

Top of the Line Protection

This is a perfect time for employers to become more familiar with ways in which they can protect their workers from head, face, and eye injuries.

According to ANSI standards, fall protection should be inspected by the user before each use. (Gorbel photo)

Creating a Safer Workplace

According to ANSI standards, fall protection equipment should be inspected by the user before each use and inspected at least once a year by a competent person.

This image is a screen capture from an American Heart Association video promoting hands-only CPR.

The Latest Scoop on AEDs

The latest research, best practices, and results show these life-saving devices are appropriate for workplaces everywhere.



Head protection that is either too large or too small is inappropriate for use, even if it meets all other requirements.

Exploring Crystalline Silica Exposure

When respirators are used to lower exposure to respirable crystalline silica, employers must establish a written respiratory program meeting the requirements of 29 CFR 1910.134.

Honeywell Honors Colorado Springs Firefighters

In addition to honoring the men and women who fought the Waldo Canyon Wildfires and the Black Forest Wildfires, Honeywell donates $255,000 worth of safety gear to them.

OSHA Cites Trucking Company for Willful Confined Space Violation

The agency has proposed $113,400 in fines against Sherman Brothers Trucking Inc., doing business as Team Transport Inc.

New Chief Confirmed for U.S. Government's HR Agency

The Senate voted 62-35 Oct. 30 to confirm Katherine Archuleta as director of the Office of Personnel Management for a four-year term.

Hospitals in Michigan Cut $116 Million in Costs by Implementing Safety Programs

Research shows that by implementing quality and safety programs, hospitals in the state saved $116 million in costs from 2011 to 2012.

Impaired driving, vandalism, and car thefts increase on Halloween night.

Law Enforcement Agencies Wary of Halloween's Tricks

Vandalism, car thefts, and impaired driving increase on the spookiest night of the year.

Safety Advocates Worried about New Pain Pill on Market

The FDA has approved a powerful pain killer, Zohydro, and many are worried about the likelihood of it being abused.

CSB Meeting on NDK Crystal Recommendations

The investigation into the December 2009 explosion identified pressure vessel design and material selection requirements, learning from previous incidents, and routine and thorough inspections of equipment as key issues.

Canadian Center Offering Workplace Health Webinars

The Canadian Institute for the Relief of Pain and Disability is presenting free webinars this fall about workplace health, disability prevention, and return-to-work.

Cirque du Soleil Nevada, MGM Grand Cited in Performer's Fatal Fall

Nevada OSHA inspectors issued six citations against Cirque du Soleil and three against the hotel-casino because of Sarah Guillot-Guyard's death last July.

Biometric Screenings: The Key to a Healthy Workplace?

Three organizations work together to create a guidance tool for companies that helps them complete health risk assessments and biometric screenings.

OSHA Fines Manufacturing Company Due to Amputation Hazards

Napoleon Springs Works faces nearly $150,000 in fines for exposing workers to amputation hazards.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

Featured

Artificial Intelligence

Webinars