Top Stories


This memorial wall was erected to honor the 29 miners who died in the Upper Big Branch Mine South explosion on April 5, 2010. (MSHA photo)

WV Senator Denounces 'Upper Big Branch – Never Again' Documentary

Don Blankenship, former CEO of Massey Energy, had it made to challenge MSHA's conclusion that the explosion four years ago in which 29 miners died resulted from basic safety violations and was a coal dust explosion that started as a methane ignition.

OSHA Cites Company for Exposing Workers to Silica Dust

The agency has cited Grede Wisconsin Subsidiaries LLC for one repeat violation involving silica exposures.

PG&E Criminally Charged in San Bruno Pipeline Explosion

More than two years after NTSB concluded its inadequate quality assurance and quality control in 1956 during a pipeline relocation project caused the explosion, the utility faces 12 charges with potential penalties of $500,000 per charge.



London Fire Brigade: Most High-Rise Residents Lack Fire Plan

The brigade's survey found 60 percent of all high-rise residents -– approximately 760,000 households -– do not have a fire escape plan.

VA's Disability Claims Backlog Drops Sharply

The number of pending disability compensation claims peaked at more than 611,000 in March 2013, but the Department of Veterans Affairs has chopped it approximately 44 percent to 344,000 claims.

This image comes from a video posted to DEUS Rescue

Incorporating Rescue Into a Fall Protection Plan

Standards should be the basis for any employer's fall protection and rescue program.

The welding arc creates extreme temperatures and may pose a significant fire and explosion hazard if safe practices are not followed. (The Lincoln Electric Company photo)

Be Prepared: Five Potential Welding Safety Hazards to Avoid

The welding arc creates extreme temperatures and may pose a significant fire and explosion hazard if safe practices are not followed.

The purchasing manager tells me that since evaluating PPE selection beyond the mere paper value, they

Make No Haste in PPE Selection for Waste Workers

Not considering the whole picture (which includes comfort and adoption) results in a lack of compliance and, therefore, increased injuries.

All new vehicles under 10,000 pounds will be required by the NHTSA final rule to be equipped with rear-view technology as of 2018.

NHTSA Final Rule Requires Rear Visibility Technology

It applies to all new vehicles under 10,000 pounds by May 2018.

Congress, DOT Inspector General Eying Huge GM Recalls

General Motors CEO Mary Barra and David Friedman, acting NHTSA administrator, are scheduled to testify about the massive recalls April 1 at a House oversight subcommittee hearing.

Improved manufacturing processes have provided designers with the means to design a TPR exoskeleton that safeguards the user’s metacarpals and knuckles all the way to the tip of each finger without hindering mobility. (Mechanix Wear photo)

High Risk on the Rig

The primary objective is to eliminate hand exposure to pinch points, crush zones, and impact hazards.

MSHA Releases February Inspection Results

The agency's data show its inspectors issued 210 citations, eight orders, and one safeguard.

We constantly fight non-approved shoes in the workplace.

Walking the Walk on Occupational Foot Protection

Make decisions that work. If you have an area with a slick floor, look at a range of solutions and whether additional problems will be created by solving one.

Airborne pathogens are highly contagious.

Keeping Pathogens Out of the Workplace

Airborne pathogens are not only highly contagious, but also they can put a workforce completely out for weeks at a time.

FDA Orders Shutdown of Seafood Company

The agency ordered a smoked seafood manufacturer to cease its operations due to the presence of Listeria.

Product Showcase

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Preventative Heat Safety

    Dehydration and heat exposure impair physical and cognitive performance. Proper hydration boosts heat stress resilience, but hydration needs are highly individualized and hard to predict across a workforce. Connected Hydration® empowers industrial athletes to stay safe through behavioral interventions, informed by sports science, and equips safety teams with critical insights to anticipate high-risk situations and adapt to evolving environmental factors. Curious about applying the latest in sports science based hydration strategies for industrial athletes? Stop by booth #1112 at AIHA or schedule a free demo today at https://epcr.cc/demo. Read More

Featured

Artificial Intelligence

Webinars