Top Stories


Under the new OSHA rule, employers must report within 24 hours after the in-patient hospitalization of one or more employees or an employee

OSHA's Revised Recordkeeping Rule: Major Implications on Employers

OSHA's new reporting rule raises several questions as to what it even means.

Many of us have had injuries or near misses ourselves. Now we have new high-hazard security risks with exposure to BBP through spitting and splashes in emergency ultra-high stress situations, with threats such as MRSA and Ebola contact exposure.

The Most Important Issue of Your Vision Protection Program

Make sure you have asked the right questions. And if you do not have time or do not want to do the dirty work, ask your safety committee to do this, they typically will be glad to help out.

The updated OSHA regulation creates a unified and up-to-date set of requirements to help employers more effectively establish safe work practices to protect their workers.

Significant Revisions to OSHA 29 CFR 1910.269

The updated regulation creates a unified and up-to-date set of requirements to help employers more effectively establish safe work practices to protect their workers.



Whatever type you choose, be sure the safety eyewear at your site stands up to the variety of impact hazards present. (Honeywell Safety Products photo)

Tips for Protecting Construction Workers' Eyes in the Summer

Many workplaces implement guidelines above and beyond OSHA's for the types of eye protection to be used based on the specific hazards that are present.

The study showed that the more actively a location participated in recognizing performance-based criteria (by distributing points for achieving specific metrics and best practices), the better they achieved in outcome-based criteria, which measured overall compliance with Standard Operating Procedures and also as compared to overall review of safety logbooks.

Safety Incentive Programs Work

The active use of the program by successful teams suggests that acknowledgement is critical to the success of these programs.

All employers, employees, and contractors within all three segments of the oil and gas industry (upstream, midstream, and downstream) are responsible for ensuring safe and healthful work sites.

Keeping Oil and Gas Workers Safe and Avoiding Costly Penalties

Exposures to hazards present in the oil and gas well drilling, servicing, and storage industry are addressed in specific standards for general industry.

​3M Seeking All Scholarship Winners

The company's not in touch with many of the past winners of its annual scholarships and wants to hear from all of them in time for 2016's 30th year of the scholarship program.

Medical Director Discusses 10 Ways to Leverage EH&S Collaboration at AIHce

Peter Greany of Work Care, Inc. gave his top ten list of ways to leverage collaboration with occupational health professionals.

NTSB Asks Pilots to 'See and Be Seen' in the Air

The agency issued a safety alert reminding pilots to look out for other aircraft and to make their presence known.

NHTSA Urges 15-Passenger Van Users to Check Tires

The NHTSA says tire safety is especially important for 15-passenger van users.

DOL and FAR Council Propose Guidance, Rule to Implement Fair Pay Order

A 60-day public comment period will follow publication.

Machine Guards May Have Prevented Arm Amputation

Griffin Lumber & Hardware received a willful violation from OSHA, which said the company ignored hazards.

OSHA and Health Canada plan to come up with a common label and SDS to help stakeholders comply with their Hazard Communication standards.

OSHA Working with Health Canada on GHS Alignment

The agencies plan to implement a system allowing the use of one label and one safety data sheet that would be acceptable in both countries.

OSHA Cites Contractor in Demolition Fatality

OSHA has cited Formica Construction Co. Inc. of Port Richmond, N.Y., for three willful, three serious, and one other-than-serious violation of OSHA standards with proposed fines of $121,000.

NSC Reports Traffic Deaths Have Increased for Six Consecutive Months

The trend is expected to continue as summer arrives.

Product Showcase

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Safety Shower Test Cart

    The Safety Shower Test Cart speeds up and simplifies emergency shower tests, ensures you stay in compliance with OSHA regulations, and significantly reduces testing costs. With 7 unique features, the cart makes testing easy, effective, and efficient. You can test water clarity, flow, temperature, and spread—all at the same time! Most safety shower testing kits create a mess, take too much time to use, and don't fully help you stay in compliance with OSHA & ANSI standards. Transform the way you test emergency showers with Green Gobbler Safety. Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence