Top Stories


This stock image taken in 2012 shows part of the vast crowd at a holy site in Mecca during that year

More Than 25,000 Health Workers Ready to Aid Hajj Pilgrims

"We recognize the concerns that many have regarding infectious disease in today's environment, including the Middle East respiratory disease coronavirus. However, since the onset of the disease in 2012, there have not been any cases among hajj pilgrims, and we are working to keep it that way," said Khalid Al-Falih, minister of health of Saudi Arabia.

VW Admits 'Defeat Device' Software in 11 Million Vehicles Worldwide

"Discrepancies relate to vehicles with Type EA 189 engines, involving some eleven million vehicles worldwide. A noticeable deviation between bench test results and actual road use was established solely for this type of engine. Volkswagen is working intensely to eliminate these deviations through technical measures," the company's statement says.

New Ebola Drug Advances in Development

ASPR and BARDA are working together to fund a new monoclonal antibody drug.



No Drones Allowed During Papal Visits

Three U.S. cities will create no drone zones from Sept. 22 through Sept. 27.

What Does the Farmer's Almanac Say About the Coming Winter?

Every year around this time the Farmer's Almanac and the Old Farmer's Almanac (yes, there are two of them!) release their forecasts for the coming winter.

The Cray supercomputer allows the Swiss agency to create more detailed and more frequent daily weather forecasts.

Supercomputer Advances Swiss Center's Weather Forecasts

The CS-Storm has a peak performance of up to 15 teraflops per node and uses liquid cooling, so it places no additional load on room cooling, according to Cray. MeteoSwiss, the Swiss national weather and climate service, is using it to produce up to eight daily forecasts per day.

FAA Awards $11 Million to Airports Based on Runway Incursion Risk Factors

FAA's Runway Incursion Mitigation program aims to identify and mitigate risk factors that contribute to runway incursions at specific airports; the risk factors include unclear taxiway markings, lighting, or signage and confusing taxiway layout.

OSHA Cites Pier 1 for Hazards at Two Texas Sites

The cited violations involve forklift inspections and forklift operators' training.

Malaria Death Rates Fall Sharply: WHO

According to WHO, an increasing number of countries are on the verge of eliminating malaria: 13 countries reported zero cases of the disease and six others reported fewer than 10 cases in 2014.

The proposed labeling changes are one of the steps Health Canada is taking to further minimize the risk of liver damage and improve acetaminophen safety. (Carlos Yudica/Shutterstock.com photo)

Health Canada Proposes Acetaminophen Labeling Changes

A new drug facts table would provide dosing instructions, warnings, and other safety information in a quick-reference, easy-to-read format.

OSHA Cites Refinery Contractor After Heat Exposure Fatality

JV Industrial Cos. Ltd. faces $7,000 in fines in fines, the maximum allowed for a serious violation.

MSHA and Murray Energy Reach Settlement Over 1,753 Violations

Murray will pay $3.3 million in penalties, the agency announced.

DOL and HHS Expand Employment Opportunities for People with Disabilities

The Office of Disability Employment Policy and the Administration for Community Living signed a new memorandum of agreement

OSHA Updates Fire Protection Systems Manual

The 128-page "Fire Service Features of Buildings and Fire Protection Systems" manual explains how fire personnel can resolve an incident sooner and more safely if a building’s design is tailored to meet their needs during an emergency.

OSHA requires that organizations provide training to all employees exposed to fall hazards.

Bad News in Preliminary 2014 Fatal Work Injury Data

Fatal falls, slips, and trips rose by 10 percent from the previous year. Transportation-related fatalities also increased slightly. The number of oil and gas workers who died on the job in 2014 rose from 112 in 2013 to 143 in 2014 (a 28 percent increase) and construction deaths rose by 6 percent to 874 in 2014.

Product Showcase

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

Featured

Artificial Intelligence

Webinars