Top Stories


NTSB Confirms Found Wreckage is Cargo Ship El Faro

NTSB Confirms Found Wreckage is Cargo Ship El Faro

The ship went missing on Oct. 1 during Hurricane Joaquin.

Chipotle Temporarily Closes Dozens of Stores after E. Coli Scare

Chipotle Temporarily Closes Dozens of Stores after E. Coli Scare

Dozens of Chipotle locations have been closed due to an E. Coli outbreak in Washington and Oregon.

One Dead in Partial Building Collapse in NYC

Eight-story building in Manhattan partially collapses killing one and trapping another.



Working in cold temperatures for prolonged periods can lead to hypothermia, an unusually low body temperature.

(Safely) Home for the Holidays?

Remember, workers are at increased risk for frostbite and hypothermia when they have health problems such as cardiovascular problems, diabetes, or high blood pressure.

All ventilators have two characteristics: Air volume delivered (flow), measured by cubic feet per minute (CFM), and force of air (pressure), static pressure measured by inch of water gauge (WG). (Air Systems International photo)

Selecting the Right Ventilation Equipment When Working in Confined Spaces Under the New Construction Standard

If the environment is hazardous, explosion-proof or intrinsically safe ventilation equipment must be used to protect workers.

Davit arm systems and backup fall arrest systems make a vertical opening into a confined space safer during entry and exit. (Capital Safety photo)

New OSHA Rescue Requirements for Confined Space Retrieval: What You Should Know

It is imperative to get the adequate training, to select the proper equipment, and to practice entering, exiting, and performing simulated rescues.

Wholesale adoption of GHS hazard classsification principles will disrupt chemical hazard assessment programs and heighten problems manufacturers and importers will face.

Perfect Foresight: Making Hazardous Chemical Safety Procedures a Priority

Cloud-based environment, health, safety and sustainability management software solutions make it easier than ever to track and report on chemicals and safety processes across facilities.

All respirators, including filtering facepieces, must be selected based on the hazard and must be certified by NIOSH. If your dust mask does not bear the NIOSH approval label, it can

Clearing the Air About Disposable Dust Masks

Always be sure that you have chosen the correct mask for the application and that you follow all of the manufacturer's recommendations and all OSHA requirements.

We must remember to always wear our hard hats. If they are sitting at a desk, on a work bench, or in a truck, they are definitely not going to protect us.

Essential Care for Essential Protection

Workers and their safety and procurement managers should be familiar with the guidance for keeping a hard hat in fighting trim.

If you know you

Four Tips for Keeping Your Hands Toasty While Working in the Cold

Let's take a look at some of the easiest ways to make sure your hands are always up for the job, regardless of the weather.

There is a growing need for a more consistent testing method and ratings that take into account recent advances in cut-resistant yarns and technologies.

New Global Standards for Protective Gloves Are Coming

Proposed changes have been submitted for both the ANSI/ISEA 105 Hand Protection Selection Criteria and the EN 388 European regulatory standard for protective gloves. Everyone involved in the design, development, and specification of cut-resistant apparel and PPE needs to understand the impact of these changes on their selection and purchasing decisions.

After cleansing hands, the skin can lose important oils and moisture. Apply an after-work conditioning cream to balance and replenish the moisture in the skin.

Protect Your Hands and Your Livelihood

Preventative maintenance and care of your workers' hands may sound like common sense, but the statistics don't lie: Many are not doing enough.

Slippery floors due to the frequent washing process are also a constant concern in health care settings.

A Spill, a Slip, a Hospital Trip

Slips, trips, and falls are an everyday risk at hospitals and comprise one of the top accident categories.

Like a car, a respirator requires maintenance to ensure it remains operable while delivering effective protection.

Righting Respirator Wrongs: Correcting Misconceptions for Greater Respiratory Protection

The final step is testing whether the selected respirator suits the workers themselves.

The intangibles are often the most difficult and dynamic pieces of the puzzle to learn. Getting out into the work environment is a very big part of your ongoing self-education.

Training to Become a Fall 'Pro' Is a Never-Ending Journey

Whatever training you attend and complete should be viewed as the launching point to get you started on learning everything you can about fall protection.

Product Showcase

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 Read More

Featured

Artificial Intelligence

Webinars