Top Stories


Safety methodologies similar to those used with other robotic applications need to be devised and implemented, referencing the new RIA and EN ISO standards while adopting a more sophisticated approach. (Rite-Hite Machine Guarding photo)

Protecting Workers from Automated Machine Operations

Plan ahead by providing proper machine guarding equipment sooner rather than later; if not to prepare for future regulations, do it to keep employees safe.

Similar to the Toyota Production System, we must all strive to eliminate waste (in our case, lost productivity from job hazard injuries) from our organizations.

Combining Safety Job Hazard Analysis & Lean Six Sigma to Improve Machine Guarding

Similar to the Toyota Production System, we must all strive to eliminate waste (in our case, lost productivity from job hazard injuries) from our organizations.

FDA Finalizes New Import Data Requirements

The Automated Commercial Environment system "serves to protect public health by allowing FDA to focus its limited resources on those FDA-regulated products being offered for import that may be associated with a greater public health risk," wrote Howard Sklamberg, J.D., deputy commissioner for Global Regulatory Operations and Policy.



Avoid Toxic Gas Exposures

Two 2016 OSHA enforcement cases are object lessons in the importance of using the latest gas monitoring technology to protect workers.

Positive Train Control Implementation Data Shows Uneven Progress

Positive Train Control Implementation Data Shows Uneven Progress: FRA

Third quarter 2016 data showed freight railroads now have PTC active on 12 percent of tracks, an increase from 9 percent last quarter. Passenger railroads increased by one percentage point to 23 percent, with progress seen mostly on the West Coast.

Cal/OSHA Cites Solar Panel Installer After Fall

The fall occurred on June 13 and "there was no evidence of fall protection at the site, despite the hazards presented by more than 140 skylights in the roof of the building, a rooftop access hatch, and the unguarded edges of the roof," according to the agency.

EPA Identifies First 10 Chemicals for Evaluation

When the list is published in the Federal Register, that will trigger a statutory deadline to complete risk evaluations for the chemicals within three years. The evaluation will determine whether the chemicals present an unreasonable risk to humans and the environment.

Grants to Boost Work Zones' and Motorists' Safety, Arizona DOT Says

The agency said one grant assists a work zone notification system that will use emerging vehicle communication technologies to alert commercial drivers that they are approaching construction or incidents on freeways and about variable speed limits, traffic congestion, and lane closures.

Image courtesy of AP and Luis Benavides

More Than 70 Dead After Brazilian Soccer Team's Plane Crashes

An early report indicates authorities say the plane crashed as a result of an electrical failure.

The November 2016 letter says first responders "are particularly concerned about the health effects posed by the continued use" of certain flame retardant chemicals in consumer products.

Vermont Congressmen Seeks EPA Review of Three Flame Retardant Classes

EPA must select the first 10 "Work Plan" chemicals for this risk assessment by the end of 2016, and it has planned to publish the list in mid-December.

OSHA Pledges to Protect Wilkes-Barre Area Retail Store Workers

As the holiday season starts, the agency wants to help keep workers safe.

SafeWork NSW Releases Alert on Tower Crane Work

The alert states that erection/climbing/dismantling of tower cranes is a potentially hazardous process involving work at heights, awkward postures, lifting and aligning components of significant size and mass, and installing temporary support systems, all of which often are done under significant time pressure due to the need for road closures, suitable daylight hours, or short weather windows.

Masonry Contractor Fined $345K for Exposing Workers to Scaffolding Hazards

The company, a severe violator, has been cited 41 times since 2011.

DOT Getting Ready for 2017 National Traffic Incident Response Week

During the next year, FHWA, first responders, and other partners are preparing with an eye on the inaugural National Traffic Incident Response Week, preparing motorists and local public safety professionals to take safe actions and prevent responder, driver, or passenger deaths.

Researchers Document Zika-Related Microcephaly Onset After Birth

Their report was published Nov. 22 in Morbidity and Mortality Weekly Report, describing 13 infants in Brazil with congenital Zika virus infection who did not have microcephaly at birth but later experienced slowed head growth.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

Featured

Artificial Intelligence

Webinars