Top Stories


Multiuse protective fabrics are designed to protect against numerous types of hazards in one single garment for workers in molten metal environments.

The Need for a Shield Against Steel

It is important to understand the entire spectrum of risks steelworkers are exposed to and consider multifunctional PPE alternatives to protect against each hazard.

Misting fans combine water and airflow, which is one of the most effective methods for both preventing and reversing heat illness in outdoor working environments such as construction sites, agriculture operations, mining, and industrial dock areas. (Big Ass Fans photo)

The Dangers of Heat Stress

Fans improve safety during the hottest months of the year.

NFPA 80

Maintaining Fire Compliant Openings

While most people using institutional and commercial buildings worry most about security issues these days, fires strike far more often than those types of emergencies.



The fabric and fabric system needs in diverse climates can be very different. Workers in cold, northern climates may need insulated products for their daily work, whereas southern climates may dictate a single layer. (Westex by Milliken photo)

Beyond Compliance: Specifying Reliable Flame Resistant Workwear

Know what you are truly buying: The AR/FR fabric in workwear is the single largest factor in determining the garment's protection level, comfort, and overall value.

Workers recognize what a good fit feels like and sounds like. (Honeywell Safety Products photo)

Ear Plug Selection and Fitting Best Practices

Fit-testing of hearing protection now allows a worker to try various hearing protectors to determine which type is most suitable.

OSHA

Staying on Top of Hazmat Training Requirements

The key standard for working with hazardous chemicals is 29 CFR 1910.1200, the revised Hazard Communication Standard, which has been aligned with the Globally Harmonized System of Classification and Labeling of Chemicals.

Is there anything we can do to get the correct responses from the workers and save more lives?

Fire Alarm or Test?

Let's work on designing and conducting tests and drills so that alarms are for emergencies and the employees respond in a safe and proper manner.

Qualified vs. Non-Qualified

This topic is still one of the most frequent questions I receive while traveling the country speaking on NFPA 70E and Electrical Safety. Since the 2004 NFPA 70E, we began to see employers emphasizing adherence to the requirements of the 70E standard.

OSHA Revises Requirements for Outreach Training Program Instructors

Revised requirements will go into effect on April 1, 2017.

WHO Publishes First List of Bacteria Where New Antibiotics 'Urgently Needed'

"Antibiotic resistance is growing, and we are fast running out of treatment options. If we leave it to market forces alone, the new antibiotics we most urgently need are not going to be developed in time," said Dr. Marie-Paule Kieny, WHO's assistant director-general for Health Systems and Innovation.

OSHA Renews Partnership with Alllied Construction Industries

The trade association represents more than 500 companies.

IEEE, American Welding Society Searching for New Executive Directors

Both of these large organizations announced last week that their current EDs have decided to retire soon.

ASTM F23 Committee Agrees to Remove ASTM F2302

The ASTM F2302 standard, Standard Performance Specification for Labeling Protective Clothing as Heat and Flame Resistant, has been withdrawn until such a time as the standard could ensure no unsafe products would meet minimum requirements. However, Mary Mikolajewski, staff manager for Committee F23, said the standard was administratively withdrawn.

WISHA Touts New Safety Apps

"We hope all employers will give these apps a try," said Jenifer Jellison, program manager for the SHIP grant program. "They're convenient, easy to use in the workplace, and offer a great new way to prevent injuries and reinforce safe work practices."

Congress Moving Bill to Repeal 2016 Recordkeeping Rule

The hearing is scheduled to start at 5 p.m. Eastern time Feb. 27 and will concern H.J. Res 83 to disapprove the OSHA rule and also H.R. 998, called the SCRUB Act.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

Featured

Artificial Intelligence