Top Stories


PHMSA Panel Meeting Next Week on Integrity Management Rule

The proposed Safety of Gas Transmission and Gathering Pipelines rule would set new IM requirements for these pipelines that are not in high consequence areas (HCAs), and it proposes a new "moderate consequence areas" definition.

Canada Renews Western Waste Management Facility Operating License

The renewed license authorizes construction of new facilities, including storage buildings for low- and intermediate-level waste, in‑ground storage containers for intermediate-level waste, in-ground containers for heat exchangers, and storage buildings for used dry nuclear fuel.

OSHA Finds Safety Failures in Fatal Incident Investigation

OSHA has issued a dozen fines following the investigation into a Pensacola-area electric cable manufacturer.



Look for a gas detection vendor that supports communication across the gas detection fleet, spanning personal and area monitors. (Industrial Scientific Corporation photo)

OnStar for Your Gas Detection Program

How are organizations leveraging historical and real-time data to keep workers safe? As with auto safety systems and services, one type of data isn't enough for your gas detection program.

One of the easiest ways to monitor safety metrics is by using a safety management software. As you improve your safety performance analysis, you’ll need a system that can handle the influx of data, give you access to real-time metrics, and help you glean valuable insights hidden within the flood of information.

Why Do Safety Inspections?

Work site safety inspections can be a vital part of your injury prevention efforts if done well.

"If a bystander is not trained in CPR, then the bystander should provide hands-only CPR. The rescuer should continue hands-only CPR until an automated external defibrillator arrives and is ready for use or EMS providers take over care of the victim."

Encouraging Hands-Only CPR

A study published in Circulation last year found that CPR knowledge and confidence to use hands-only CPR can be increased through large-scale community training.

Administrative controls and warnings are less effective because they rely on workers following proper procedures and safe work practices. (Schneider Electric photo)

The Importance of Arc Flash Mitigation

De-energizing equipment does not absolve the facility from the responsibility of performing an arc flash analysis or providing the necessary PPE.

Proper hand washing is key for infection control.

Safer Soap: A Look at Harmful Ingredients Found in Hand Cleansers

According to the Centers for Disease Control and Prevention, up to 40 percent of workers will suffer from occupational dermatitis at some point in their working lives.

Imagine the outcome if elements of consequential leadership made its way into a leadership environment where there is an unwavering commitment to safety excellence. (Make My Day Strategies LLC photo)

Help the 'Bulletproof' Employee Make the Connection

Inspire conformance through influence, awareness, and definitively through the identification of the harmful and helpful biases we all have, some of them buried deep within us.

Hazmat employees should be aware of emergency action plans, spill response procedures, fire prevention plans, and any other procedures that are in place to help prevent injury while preparing or transporting a hazardous material.

Key Requirements for Employees Transporting Hazmats

Like OSHA and EPA chemical safety trainings, DOT training helps hazmat employees to recognize and identify hazardous materials and learn how their functions ensure that those materials can be transported safely.

Be Ready for Hurricane Season, Authorities Advise Coastal Residents

The Florida Department of Health already has warned Floridians to be ready and says every hurricane season should be treated as a serious threat.

All employers, employees, and contractors within all three segments of the oil and gas industry (upstream, midstream, and downstream) are responsible for ensuring safe and healthful work sites.

The Significance of API RP 2219 Recommendations in the BLSR Accident, Part II

Employers and workers need to pay special attention to minimum recommended safety requirements of approved standards and safe working procedures.

Eye protection is vital to safeguard your eyes and maintain healthy vision across a wide variety of jobs. (3M Personal Safety Division photo)

How Protective Eyewear Has Changed Dramatically Over the Decades

Today's safety eyewear can be so lightweight and comfortable that at times workers don't even notice they are wearing it once it's on.

After an individual renews his eyewear prescription, there are other ways to help reduce CVS. Specialty lenses are now developed to aid the computer user.

Safety Eyewear for Computer Vision Syndrome

Computer work is more visually demanding than any other type of office work.

Flash fires and fuel-fed fires are two different hazards, and it

Eight Things Oil & Gas Workers Should Know About Flash Fires

Flash fires and fuel-fed fires are two different hazards, and it's critical to distinguish between the two for various safety reasons.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

Featured

Artificial Intelligence