Top Stories


There are three common respiratory dangers a process hazard analysis (PHA) can help identify—risk of fire, release of toxins, and volatility of the environment.

Emergency Escape Respirators

Time, efficiency, and protection become key factors the right respirator selection can address before a worker is ever faced with an emergency situation.

Job Hazard Analysis Process Redesign: Integration of Job Hazard Analysis and Work Planning Processes

Integrating the JHA and Work Planning processes reinforced the new philosophical approach for shifting responsibility for working safely to those responsible for planning and actually performing the work.

Although the numbers and types of fall hazards may vary greatly throughout industry sectors, no facility is without fall hazards. (New Pig photo)

Before the Fall: Recognize Fall Hazards and Conduct Training to Prevent Incidents

Even if a fall hazard isn't specifically addressed, if it can be identified, plans need to be made to mitigate the hazard and prevent employee injuries.



Pictograms are required safety data sheet elements that are intended to convey specific hazard information visually.

GHS HazCom Training is More Important Than Ever

An effective HazCom training program provides employees with a deeper understanding of the dangers and emergency situations they may face.

Fatality Investigation: 22-Year-Old Construction Laborer Killed in Trench Collapse

The Kentucky Fatality Assessment and Control Evaluation (FACE) program investigates fatalities and makes recommendations for preventing future similar injuries.

Manufacturers say that it

All-Important Equipment When Seconds Count

Placement of the emergency equipment is very important. A person in pain and with possibly obstructed vision should be able to traverse the path from hazard to the flushing units within seconds.

AEM Releases Updated Digger Derrick Safety Manual

The updated manual has new and expanded content on safe equipment operation, start-up, shutdown, and maintenance precautions.

Skilled Nursing Center Wins MIOSHA Award

The CET Gold Award criteria include having an effective Safety and Health Management System. MIOSHA staff consult with Gold awardees and evaluate their SHMS to ensure that key elements are implemented.

DOE Completes Evaluation of Hanford's Tunnel 2, Finds 'High' Risk of Collapse

The two PUREX storage tunnels hold mixed radioactive and chemical waste. A section of Tunnel 1 collapsed May 9, and state authorities then ordered DOE and CH2M HILL Plateau Remediation Company to immediately assess the integrity of both.

New Study Examines Injured Workers' Opioid Use By States

Comparing opioid use for workers injured in 2010 and 2013 over an average two-year period following the injury, the study found reductions in the average amount of opioids dispensed to injured workers in several states, with larger reductions seen in Kentucky, Maryland, Michigan, and New York.

ATSB Releases Report on Fatal Parachuting Crash

The 2014 crash killed all five aboard. "Our investigation did uncover a number of safety issues associated with occupant restraint, modification of parachuting aircraft, and scope for improving the risk controls associated with parachuting operations," said ATSB Chief Commissioner Greg Hood.

DOT Launches Infrastructure Grants Program

DOT will make awards under the $1.5 billion INFRA program to both large and small projects. For a large project, the INFRA grant must be at least $25 million. For a small project, the grant must be at least $5 million.

Operating Lifesaver Pushing Safety Awareness with Grants

Operation Lifesaver, Inc. and the Federal Railroad Administration announced $217,000 in grants will be awarded to 15 state Operation Lifesaver programs to fund rail crossing safety and trespass prevention public education projects in conjunction with OLI's U.S. Rail Safety Week this fall.

NOAA, OSHA: Watch Out for Excessive Heat

The National Weather Service and OSHA have partnered to increase awareness for outdoor workers and their employers during excessive heat events, with NWS incorporating specific outdoor worker safety precautions when heat advisories and warnings are issued. OSHA and Department of Labor again are reminding employers and workers this week to take precautions to protect themselves before a heat wave begins.

NFPA Will Develop High-Rise Fire Risk Assessment Tool

The risk assessment tool will help authorities having jurisdiction prioritize mitigation by incorporating a methodology that identifies key variables (such as wall materials and building fire protection systems). It is scheduled to be completed this year.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Full Line of Defense Against Combustible Dust Nilfisk

    Nilfisk provides a comprehensive range of industrial vacuums meticulously crafted to adhere to NFPA 652 housekeeping standards, essential for gathering combustible dust in Class I, Group D, and Class II, Groups E, F & G environments or non-classified settings. Our pneumatic vacuums are meticulously engineered to fulfill safety criteria for deployment in hazardous surroundings. Leveraging advanced filtration technology, Nilfisk ensures the secure capture of combustible materials scattered throughout your facility, ranging from fuels, solvents, and metal dust to flour, sugar, and pharmaceutical powders. Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

Featured

Artificial Intelligence