Top Stories


There are three common respiratory dangers a process hazard analysis (PHA) can help identify—risk of fire, release of toxins, and volatility of the environment.

Emergency Escape Respirators

Time, efficiency, and protection become key factors the right respirator selection can address before a worker is ever faced with an emergency situation.

Job Hazard Analysis Process Redesign: Integration of Job Hazard Analysis and Work Planning Processes

Integrating the JHA and Work Planning processes reinforced the new philosophical approach for shifting responsibility for working safely to those responsible for planning and actually performing the work.

Although the numbers and types of fall hazards may vary greatly throughout industry sectors, no facility is without fall hazards. (New Pig photo)

Before the Fall: Recognize Fall Hazards and Conduct Training to Prevent Incidents

Even if a fall hazard isn't specifically addressed, if it can be identified, plans need to be made to mitigate the hazard and prevent employee injuries.



Pictograms are required safety data sheet elements that are intended to convey specific hazard information visually.

GHS HazCom Training is More Important Than Ever

An effective HazCom training program provides employees with a deeper understanding of the dangers and emergency situations they may face.

Fatality Investigation: 22-Year-Old Construction Laborer Killed in Trench Collapse

The Kentucky Fatality Assessment and Control Evaluation (FACE) program investigates fatalities and makes recommendations for preventing future similar injuries.

Manufacturers say that it

All-Important Equipment When Seconds Count

Placement of the emergency equipment is very important. A person in pain and with possibly obstructed vision should be able to traverse the path from hazard to the flushing units within seconds.

AEM Releases Updated Digger Derrick Safety Manual

The updated manual has new and expanded content on safe equipment operation, start-up, shutdown, and maintenance precautions.

Skilled Nursing Center Wins MIOSHA Award

The CET Gold Award criteria include having an effective Safety and Health Management System. MIOSHA staff consult with Gold awardees and evaluate their SHMS to ensure that key elements are implemented.

DOE Completes Evaluation of Hanford's Tunnel 2, Finds 'High' Risk of Collapse

The two PUREX storage tunnels hold mixed radioactive and chemical waste. A section of Tunnel 1 collapsed May 9, and state authorities then ordered DOE and CH2M HILL Plateau Remediation Company to immediately assess the integrity of both.

New Study Examines Injured Workers' Opioid Use By States

Comparing opioid use for workers injured in 2010 and 2013 over an average two-year period following the injury, the study found reductions in the average amount of opioids dispensed to injured workers in several states, with larger reductions seen in Kentucky, Maryland, Michigan, and New York.

ATSB Releases Report on Fatal Parachuting Crash

The 2014 crash killed all five aboard. "Our investigation did uncover a number of safety issues associated with occupant restraint, modification of parachuting aircraft, and scope for improving the risk controls associated with parachuting operations," said ATSB Chief Commissioner Greg Hood.

DOT Launches Infrastructure Grants Program

DOT will make awards under the $1.5 billion INFRA program to both large and small projects. For a large project, the INFRA grant must be at least $25 million. For a small project, the grant must be at least $5 million.

Operating Lifesaver Pushing Safety Awareness with Grants

Operation Lifesaver, Inc. and the Federal Railroad Administration announced $217,000 in grants will be awarded to 15 state Operation Lifesaver programs to fund rail crossing safety and trespass prevention public education projects in conjunction with OLI's U.S. Rail Safety Week this fall.

NOAA, OSHA: Watch Out for Excessive Heat

The National Weather Service and OSHA have partnered to increase awareness for outdoor workers and their employers during excessive heat events, with NWS incorporating specific outdoor worker safety precautions when heat advisories and warnings are issued. OSHA and Department of Labor again are reminding employers and workers this week to take precautions to protect themselves before a heat wave begins.

NFPA Will Develop High-Rise Fire Risk Assessment Tool

The risk assessment tool will help authorities having jurisdiction prioritize mitigation by incorporating a methodology that identifies key variables (such as wall materials and building fire protection systems). It is scheduled to be completed this year.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

Featured

Artificial Intelligence