Top Stories


OSHA Cites Kansas Contractor for Fall and Other Hazards

Wichita, Kansas, roofing contractor Jose Barrientos faces proposed penalties totaling $191,071 for two willful and six serious violations, according to the agency.

Recreational Boating Fatalities Fell in 2017: USCG

Operator inattention, improper lookout, operator inexperience, machinery failure, and alcohol use were the top five primary contributing factors in fatal 2017 recreational boating accidents.

CDC Offers Tropical Storm Preparedness Tips

The Centers for Disease Control and Prevention's tips on preparing for the Atlantic tropical storm and hurricane season are especially timely this year.



NTSB Announces Public Hearing on Amtrak Crashes

The July 10-11 hearing in Washington, D.C., will examine issues involved in the Dec. 18, 2017, derailment in DuPont, Wash., and the Feb. 4, 2018, collision with a freight train near Cayce, S.C.

CAL FIRE Stresses Water and Fire Safety

Drought conditions continue across much of California, according to CAL FIRE's Memorial Day message, which notes that wildfires can spark easily if caution is not followed.

AIHce EXP 2019: Destination Minneapolis

The May 2019 conference and expo will take place in the only U.S. city to earn a place in the Wall Street Journal's top 10 places to visit in 2018, according to the 2018 Official Visitors Guide to the Twin Cities Area.

NIOSH Studying Condition of Stockpiled Respirators, Surgical Gowns

Federal, state, city, and medical partners of NIOSH are awaiting its findings about the stockpiled PPE. Researchers are in the second year of a three-year project.

Fatality Case Shows Dangers of Deep Confined Spaces

An AIHce EXP 2018 session presenter analyzed a 2012 fatality inside a sewer valve vault that was 18 feet, 6 inches deep.

Bloodborne Pathogens Compliance Still a Concern

Two former OSHA staffers identified the agency's most-cited violations during 25 years of enforcement (1991-2015), presenting their findings at AIHce EXP 2018.

Live from ASSE 2018 is Coming Up Soon

ASSE 2018 is just around the corner! The expo floor will be full of companies ready to announce, showcase, and demo their newest and most innovative safety products.

NTSB Releases Preliminary Report on Uber Test Vehicle Crash

The Board’s report said the self-driving system data showed the vehicle operator engaged the steering wheel less than a second before impact and began braking less than a second after impact.

NSC Announces Winners of Green Cross for Safety Awards

The Council presented the Excellence Award to Schneider National, the Innovation Awards to Brigham Health Sleep Matters Initiative, and the Advocate Award to Common Ground Alliance 811 Campaign during a ceremony on Wednesday in Chicago.

John Deere Recalls Compact Utility Loaders Due to Injury Hazard

John Deere Recalls Compact Utility Loaders Due to Injury Hazard

Information is missing from the operator’s manual about the proper ballast when the loader is attached to a John Deere model 2025R tractor. If improperly ballasted, the tractor can be unstable and create a risk of injury to the operator or bystanders.

Pay attention to your gas detection program. If you aren

Combating the 'Rodney Dangerfield Effect' in Gas Detection

Unfortunately for the individual user and the companies that mandate these monitors, there needs to be a correction. If not, there can be some dire consequences.

Flexibility and Hazard Knowledge Needed for Disaster Responders

Safety professionals discussed their experiences in emergency response during and after hurricanes Harvey and Maria.

Product Showcase

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence

Webinars