Top Stories


ATSDR Publishes Toxicological Profile for Perfluoroalkyls

People can be exposed to PFAs in the air; in indoor dust, food, and water; and in some home products. The main sources of exposure to PFAs, such as PFOA and PFOS, are usually from eating food and drinking water that has these chemicals.

California Utility Takes $2.5B Charge for Wildfires

"Years of drought, extreme heat, and 129 million dead trees have created a 'new normal' for our state that requires comprehensive new solutions," PG&E Corporation CEO and President Geisha Williams said.

White House Proposes Merger of DOL and Education Department

The proposed Department of Education and the Workforce "would allow the Federal Government to address the educational and skill needs of American students and workers in a coordinated way," the OMB reform plan says.



Trenching Stand Down Under Way

OSHA has partnered with the National Utility Contractors Association (NUCA) and the North American Excavation and Shoring Association (NAXSA) to promote a Trench Safety Stand Down during June 18-23.

Follow CDC's Tips to Avoid Lightning Injury

During 2017, Florida, Alabama, Colorado, North Carolina, and Texas had the most lightning deaths. CDC notes that Florida is considered the "lightning capital" of the country, with more than 2,000 lightning injuries in the past 50 years.

Werner Co. Recalls Telescoping Aluminum Ladders

The June 20 recall involves five models of aluminum telescoping ladders that can be used in five different positions. They range in size from 13 feet to 26 feet when extended.

New Ohio BWC Program to Help Small Businesses

"Even small employers can save money and improve workplace safety by better understanding Ohio's workers' compensation system," said Kevin Abrams, COO of the bureau. "PAR offers a flexible alternative for smaller employers to improve safety and become more engaged in their risk management programs."

New Underground Ventilation System Under Construction at WIPP

The system will provide approximately 540,000 cubic feet per minute of air to the WIPP underground, significantly more than the current ventilation system. At an estimated cost of $288 million, the new ventilation system is expected to be completed by early 2021.

World Standards Day 2018 Focused on Hazard Mitigation, Built Environment

ANSI and NIST hosted a World Standards Day 2018 event in Washington, D.C., on June 14 with expert discussions focused on codes and standards and their significant role in supporting strong, resilient 21st century infrastructure solutions.

NIOSH Publishes Final Research Agenda for Agriculture, Forestry, Fishing

The agenda document says during 2011-14, seafood processing workers experienced the highest injury/illness rate among all maritime workers: 6,286 injuries and illnesses per 100,000 workers, according to 2016 BLS data.

The rule will require employers to notify OSHA of work-related fatalities within eight hours and work-related in-patient hospitalizations, amputations, or an employee

Health Canada Regs Would Strengthen Surveillance of Drugs, Medical Devices

The proposed regulations would require hospitals to report all serious adverse drug reactions and medical device incidents, in writing, within 30 days of when the incident was first documented within the hospital.

AMA Delegates Adopt Several Gun Safety Measures

"People are dying of gun violence in our homes, churches, schools, on street corners, and at public gatherings, and it's important that lawmakers, policy leaders, and advocates on all sides seek common ground to address this public health crisis," said AMA Immediate Past President David O. Barbe, M.D., MHA.

SAMHSA Updates Toolkit to Help Prevent Opioid Deaths

The toolkit recommends that naloxone be made available to first responders and others who might respond to a possible overdose.

FRA Hosts First Positive Train Control Symposium

The agency will host two more this summer: July 16, focused on best practices for PTC system field testing and interoperability testing, and Aug. 20, focused on lessons learned and best practices for PTC Safety Plans.

NYC Department of Buildings Seeks 2019 Energy Code Advisory Committee Members

Applications from those seeking to be considered for 2019 Energy Code Advisory Committee membership must submit a completed application no later than June 21. Residential applications are especially needed, according to the department's posted announcement.

Product Showcase

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

Featured

Artificial Intelligence

Webinars