Top Stories


Werner Co. Recalls Telescoping Aluminum Ladders

The June 20 recall involves five models of aluminum telescoping ladders that can be used in five different positions. They range in size from 13 feet to 26 feet when extended.

New Ohio BWC Program to Help Small Businesses

"Even small employers can save money and improve workplace safety by better understanding Ohio's workers' compensation system," said Kevin Abrams, COO of the bureau. "PAR offers a flexible alternative for smaller employers to improve safety and become more engaged in their risk management programs."

New Underground Ventilation System Under Construction at WIPP

The system will provide approximately 540,000 cubic feet per minute of air to the WIPP underground, significantly more than the current ventilation system. At an estimated cost of $288 million, the new ventilation system is expected to be completed by early 2021.



World Standards Day 2018 Focused on Hazard Mitigation, Built Environment

ANSI and NIST hosted a World Standards Day 2018 event in Washington, D.C., on June 14 with expert discussions focused on codes and standards and their significant role in supporting strong, resilient 21st century infrastructure solutions.

NIOSH Publishes Final Research Agenda for Agriculture, Forestry, Fishing

The agenda document says during 2011-14, seafood processing workers experienced the highest injury/illness rate among all maritime workers: 6,286 injuries and illnesses per 100,000 workers, according to 2016 BLS data.

The rule will require employers to notify OSHA of work-related fatalities within eight hours and work-related in-patient hospitalizations, amputations, or an employee

Health Canada Regs Would Strengthen Surveillance of Drugs, Medical Devices

The proposed regulations would require hospitals to report all serious adverse drug reactions and medical device incidents, in writing, within 30 days of when the incident was first documented within the hospital.

AMA Delegates Adopt Several Gun Safety Measures

"People are dying of gun violence in our homes, churches, schools, on street corners, and at public gatherings, and it's important that lawmakers, policy leaders, and advocates on all sides seek common ground to address this public health crisis," said AMA Immediate Past President David O. Barbe, M.D., MHA.

SAMHSA Updates Toolkit to Help Prevent Opioid Deaths

The toolkit recommends that naloxone be made available to first responders and others who might respond to a possible overdose.

FRA Hosts First Positive Train Control Symposium

The agency will host two more this summer: July 16, focused on best practices for PTC system field testing and interoperability testing, and Aug. 20, focused on lessons learned and best practices for PTC Safety Plans.

NYC Department of Buildings Seeks 2019 Energy Code Advisory Committee Members

Applications from those seeking to be considered for 2019 Energy Code Advisory Committee membership must submit a completed application no later than June 21. Residential applications are especially needed, according to the department's posted announcement.

Nominations Being Accepted for 2018 Governor's Lifesaving Awards in Washington State

To be eligible, the life-saving incidents must have occurred during work hours and must have taken place between June 1, 2017, and May 31, 2018. The deadline for nominations is June 30.

OSHA Cites Wisconsin Contractor for Fall Hazards

"Employers are required to provide fall protection to employees working in construction at heights above 6 feet," said Robert Bonack, OSHA Appleton Area Office director. "This employer's repeated failure to comply with federal safety requirements exposes employees to fatal injuries from fall hazards."

Final Rule Will Streamline Bill Processing for Disabled Miners

The new regulations adopt industry-standard payment formulas derived from those used by Medicare and are similar to those used by other OWCP-administered compensation programs for federal employees, and the rule codifies the black lung program's current payment practice for prescription drug payments.

NSC Survey Finds 90 Percent of Employers Negatively Impacted by Employee Fatigue

NSC Survey Finds 90 Percent of Employers Negatively Impacted by Employee Fatigue

According to the council, 13 percent of workplace injuries can be attributed to fatigue. In the survey report, NSC identifies night shift and overtime scheduling, a lack of time off between shifts, and inadequate rest areas for employees within the workplace as some of the factors contributing to worker fatigue.

Safe Work Australia Publishes Guidance on Work-related Mental Health

The guide is built around three main sections: Preventing Harm, Intervening Early, and Supporting Recovery. It outlines a systematic approach to ensuring workers' psychological health and safety that revolves around the elements discussed in the three sections.

Product Showcase

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence

Webinars