Top Stories


Transport Canada to Look at De-Icing Recommendations

The Transportation Safety Board of Canada has recommended that the Department of Transport collaborate with air operators and airport authorities to identify locations in remote northern areas of the country where there is inadequate de-icing and anti-icing equipment and take urgent action to ensure the proper equipment is available.

OSHA Cites Florida Roofing Contractor for Repeated Fall Hazard Exposure

The company has been cited four times in the past five years for similar violations.

U.S. Fatal Work Injury Rate Dropped in 2017

Fatal falls were at their highest level in the 26-year history of the Census of Fatal Occupational Injuries (CFOI) and accounted for 887 workers' deaths. BLS also reported that fatal occupational injuries involving confined spaces rose 15 percent to 166 in 2017 from 144 in 2016.



Agency Warns Dental Patients of Infection Potential

"Even though the risk of infection from this situation is likely to be low, we don't know the exact risk for each patient at this clinic," said Dr. Jeff Duchin, Health Officer for Public Health – Seattle & King County. "Because infections can spread when good infection control practices are not followed, if you've been a patient at the George M. Davis Clinic, talk with your health care provider to help determine if you should get tested."

HELP Chairman Will Not Seek Re-Election in 2020

U.S. Senator Lamar Alexander will not seek re-election to the Senate in 2020, according to a statement he released Dec. 17.

Michigan Lowers Acceptable Blood Lead Levels for Workers

Michigan Lowers Acceptable Blood Lead Levels for Workers

Under the new MIOSHA rules, employees must be removed from lead exposure when their BLL reaches 30 μg/dL and cannot return to work involving lead exposure until their BLL falls below 15 (μg/dL).

NIOSH Develops Tools to Help Identify and Assess Areas of Dampness and Mold

Dampness can promote the growth of mold, bacteria, fungi, and insects. Workers and others in damp buildings can be exposed to airborne pollutants from biological contaminants and the breakdown of building materials.

OSHA Renews Charter of its Maritime Advisory Committee

MACOSH is made up of 15 representative members appointed by the secretary from multiple segments of the maritime industry (such as shipyard, commercial fishing, and longshoring) and representing multiple views and interests, such as management, safety and health professional organizations, and labor.

Oregon OSHA Pesticide Drift Regs Taking Effect Jan. 1

The rules expand a protective zone, extend the evacuation period, require storage for boots and shoes to prevent pesticides from being tracked into workers' housing, and require doors, windows, and air intakes to be closed when pesticides are applied.

Ho, Ho, How to Lower Retail Workers' Stress Levels

NIOSH recommends managers and employees work together to identify critical stress-related problems and design reasonable solutions to address them. And its online resources can help retail employers and workers alike.

NTSB to Unveil New Most Wanted List Jan. 9

NTSB also will host a Twitter Q&A during the event. To participate in the Twitter Q&A and to stay up to date with the Most Wanted List, follow the agency on Twitter at @NTSB and use the hashtag #ntsbmwl.

Toyota Issues Recalls of Almost 134,000 SUVs, Trucks

Toyota is conducting a safety recall involving certain 2018-2019 Model Year Tacomas, 2008-2019 Model Year Land Cruisers, and 2008-2019 Model Year Lexus LX 570 vehicles in the United States.

Transport Canada Setting New Flight and Duty Time Limits

Transport Canada is also introducing amendments to the Fit for Duty regulations that will prohibit any flight crew member to work when not fit for duty. This includes consumption of alcohol or drugs, mental and physical conditions, and fatigue.

Incentive Federation Plans to Develop Standards

The Incentive Federation, Inc. announced Dec. 12 that it is finalizing proposals to both ANSI to be approved as a developer of a Domestic Standards Program for Workforce Incentives, Rewards and Recognition Standards, and to ISO to have a Technical Committee established to oversee those standards and to eventually have them approved by ISO.

$66,000 Fine Issued in Fatal California Trench Collapse

On May 9, two Empire Equipment Services workers were installing sewer pipes at the site when a 30-foot-wide section of the trench's sidewall sloughed and collapsed. Only one of the workers was able to escape.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

Featured

Artificial Intelligence