Top Stories


Live From Safety 2019 Day 2

The second day of Safety 2019 had longer expo hours and even more to see than day one! See what you might’ve missed by visiting our Live From Safety 2019 social zone at OHSonline.com/LIVE!

Handling, or Mishandling, an OSHA Enforcement Action: Safety 2019

Session presenters J.A. Rodriguez, Jr. and Courtney M. Malveaux explain how to successfully handle an OSHA enforcement case and what not to do.

Easily Avoiding OSHA Citations and Remaining in Compliance

According to the top 10 most cited standards from OSHA, fall protection and hazard communications account for over 12,500 citations in the last fiscal year. Several of these citations stem companies and organizations that do not have a program to properly train employees, Paul Andersen of OSHA Compliance Services, LLC said in a session titled "30 Common OSHA Citations You Can Easily Avoid" at Safety 2019 this week.



ISEA to Work on Heat Illness National Standard, Wearables Guidance

Two of the International Safety Equipment Association's new projects involve work to bring about a national heat illness prevention standard and to offer help to the industry in managing the data from a host of connected, wearable products.

The Importance of Evaluating Indoor Air Quality

According to Louise Vallee, CSP, CIH, CPE, of Crum and Forester, office ergonomics and indoor air quality are the most common complaints of office employees. Management tends to prioritize these issues last creating more complaints from workers.

Live From Safety 2019 Day 1

The first day of the Safety 2019 show in New Orleans went by in a flash! Catch up on all the action by visiting our Live From Safety 2019 social zone at OHSonline.com/live!

U.S. House to Consider 2020 Appropriations Bill for Labor, HHS This Week

H.R. 2740 would provide a total of $13.3 billion in discretionary appropriations for the Department of Labor, including $298 million for the DOL Wage and Hour Division and $661 million for OSHA, which would be an increase of $103 million above the 2019 enacted level.

Louisiana's Governor Signs Firefighter PTSD Bill

SB 107 was unanimously passed in the state Legislature in late May. "This is a tremendous victory for our members in Louisiana," IAFF General President Harold Schaitberger said. "Now they can seek the treatment they need when they need it."

Risk Management Panel: Standards Help Drive Systematic, Repeatable Results

A Safety 2019 session on the ASSP Risk Management Institute focused on implementing risk management systems and utilizing several key standards, including ISO 45001 and 31000 and also ANSI Z10 and 590.3, Prevention Through Design.

Public Hearings Set on L&I's Proposed OT Reforms

"The current system is out of date. It's at risk of failing tens of thousands of workers by broadly defining what a white collar worker is, which allows businesses to pay salaries that may be even less than minimum wage," said L&I Director Joel Sacks. "We want to make sure that people who legitimately deserve overtime get paid for the extra hours they work. Washington's minimum wage has been updated repeatedly for decades; this hasn't been. This proposed rule links future salary thresholds to the minimum wage."

Huntsman Corporation Facility Wins Another Michigan VPP Star Award

"As a team, we're delighted to have secured STAR status once again," said Pete Panourgias, EHS manager at the Auburn Hills site. "The fact that we've held this accolade without a break for 15 years is a testimony to the dedication of our management and the efforts of each and every member of our team."

IAEA Opens New Linear Accelerator Facility

The new facility at IAEA laboratories in Seibersdorf, Austria, will significantly increase the agency's capacity to provide dosimetry services and support cancer control worldwide.

Revolutionizing the speed by which FDA personnel can check minimally processed fresh produce for Salmonella is the goal of the 2014 FDA Food Safety Challenge.

WHO Marks World Food Safety Day

"Every country around the world, from small to big, from rich to poor, has suffered from foodborne illnesses, and Europe is no exception. The scale of the challenge posed by foodborne disease is striking, indicating the importance of preventing and mitigating risks to food safety," said Dr. Zsuzsanna Jakab, WHO's regional director for Europe.

DOT Secretary Proposes Legislation to Reauthorize Pipeline Safety Programs

The proposed legislation would authorize PHMSA to use non-financial incentives to pipeline operators that voluntarily exceed the minimum federal pipeline safety regulations to ensure operating safety and reliability.

DOE Proposes to Redefine High-Level Radioactive Waste

According to DOE, the revised interpretation, "if implemented through subsequent actions," could provide a range of benefits to both DOE and the public.

Product Showcase

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

Featured

Artificial Intelligence

Webinars