Articles


5 Ways Connected Gas Detection Devices Can Boost Your Organization’s Productivity

5 Ways Connected Gas Detection Devices Can Boost Your Organization’s Productivity

Here’s why safer work doesn’t have to mean slower work.

Changing Times, Changing Workplaces

Changing Times, Changing Workplaces

How does the shift to remote work impact your company’s evolving strategies for implementing effective drug testing policies for your remote employees?

The Rise of Portable Eyewash Stations

The Rise of Portable Eyewash Stations

When and why to opt for portable eyewash solutions; the role of the portable eyewash station in dynamic workplace challenges; and real-world scenarios where portable eyewash stations helped.

The Safety Helmet Balancing Act: Considering Style and Comfort, Not Just Protection

The Safety Helmet Balancing Act: Considering Style and Comfort, Not Just Protection

As Type II safety helmets become the standard on job sites, factoring in comfort and style can help increase adoption rates.

Ascending Safely

Ascending Safely

Why choosing stairs over ladders is the smarter choice for rooftop safety.

Lessons from Construction Safety’s Constant Change

Lessons from Construction Safety’s Constant Change

Managing uncertainty is a given in construction—safety professionals everywhere should take note.

Put Your Best Footwear Forward

Put Your Best Footwear Forward

Stepping up safety for specific environmental, application and exposure risks.



Having a Heart

This year, ensure you keep AEDs at the work site and train the team in their use.

Nobody Reads Anymore: Why Mobile Training Is the Key to a Safer Workplace

Mobile training materials help all employees keep critical safety information close at hand and make it easier for employers to maintain a safer workplace.

Washington L&I Will Meet to Discuss Safety Standards for Waterfront Workers

Washington L&I Will Meet to Discuss Safety Standards for Waterfront Workers

The virtual meeting will take place on March 21, 2024, allowing stakeholder review of the proposed rule changes.

Washington L&I Proposes Updates to Contractor Registration Rules

Washington L&I Proposes Updates to Contractor Registration Rules

The rule change addresses definitions, penalty and bond amounts, and fees for general and specialty contractors.

ASSP Introduces First Heat Stress Standard for Construction and Demolition

ASSP Introduces First Heat Stress Standard for Construction and Demolition

More than 30 safety experts developed the standard over a three-year period.

NSC Reports More Than 44,000 Deaths from Traffic Accidents in 2023

NSC Reports More Than 44,000 Deaths from Traffic Accidents in 2023

Seven states and the District of Columbia have seen increases of at least 10 percent.

OSHA Cites Auto Parts Manufacturer for 22 Serious Violations

OSHA Cites Auto Parts Manufacturer for 22 Serious Violations

Aludyne Columbus now faces $182,344 in proposed penalties.

Washington L&I Updates Electrical Safety Standards

Washington L&I Updates Electrical Safety Standards

The new regulations, effective from April 1, 2024, aim to improve public safety and align with current industry practices.

Improving Roofer Safety in 2024

Improving Roofer Safety in 2024

Roofing is one of America's most dangerous professions, necessitating enhanced safety measures to reduce the annual fatalities and accidents.

Falls are a Major Occupational Threat — How Do I Protect My People?

Falls are a Major Occupational Threat — How Do I Protect My People?

Occupational falls—often underestimated and primarily occurring at lower levels—have become the second-leading cause of worker deaths, necessitating a tailored and comprehensive approach to safety hazard mitigation across all industries.

Alabama Sawmill Faces Heavy Fines After Second Fatal Incident in Three Years

Alabama Sawmill Faces Heavy Fines After Second Fatal Incident in Three Years

OSHA has deemed Phenix Lumber Co. a “severe violator” since 2020.

MSHA Issues Safety Alert for Miners Operating Near Water

MSHA Issues Safety Alert for Miners Operating Near Water

Miners should take these recommended precautions when working near water.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. 3

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. 3

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" 3

Featured