Articles


CDC Recommends Antibiotic Stewardship Programs for Hospitals

"Improving antibiotic prescribing can save today's patients from deadly infections and protect lifesaving antibiotics for tomorrow's patients," said CDC Director Dr. Tom Frieden, M.D., MPH.

The Oregon OSHA document covers the selection of head-to-toe PPE.

OR-OSHA Guide Explains PPE Selection for Applying Pesticides

It covers head-to-toe protection, including charts comparing the protection of various coverall types and chemical-resistant glove options.

NTSB to Offer March Safety Courses

The courses will cover interviewing, transportation disaster response, aircraft accident investigation, and more.

This CSB photo shows the aftermatch of the dust explosion and fire on Feb. 20, 2003, at the CTA Acoustics manufacturing plant in Corbin, Ky. killing seven workers.

Miller Still Pushing for OSHA Combustible Dust Rule

He proposed an amendment Feb. 27 to the All Economic Regulations Are Transparent Act (H.R. 2804) that would have exempted the regulation from the act's requirements, but it was defeated.

IMO Guidance Settles Security Training Quandary

It will solve the problem that many seafarers "were reportedly unable to have access to approved training courses or were unable to be issued certification of security-related training in accordance with the STCW regulations."

The Wanapum Dam is downstream from the Vantage Bridge, which is the Interstate 90 crossing over the Columbia River in Washington state. (Grant County Public Utility District photo)

Engineers Monitoring Crack in Columbia River Dam

Water levels above the Wanapum Dam are being reduced to 20 feet lower than the normal high operating level to reduce pressure on the spillway after divers found a 2-inch-wide crack that was 65 feet long in the base of one of the spillway piers.

MSHA Releases January Inspection Results

The agency releases the results of January inspections, which resulted in 198 citations.

The public has 45 additional days to file comments about the BSEE proposed rule affecting offshore oil and gas operations.

Comfort is the Secret to Success

Check for compatibility. It's important to have your employees suit up with all of their gear when fitting a hearing protector.



This image is a screen capture from a 2013 Bulwark video showing an arc and flash fire rated rain suit being exposed to a three-second flash fire. The test method depicted in the video is ASTM F 1930, which is the flame exposure test used in NFPA 2112 and ASTM F 2733.

The Importance of Specifying NFPA 2112 Certified Garments for Flash Fire Protection

The real question is, for you as a safety professional, how much is your “peace of mind” worth?

The free web mobile app for hazmat responders has been downloaded almost 83,000 times, PHMSA reported Aug. 30.

Extremely Hazardous Substances and 112(r) Plans

Even with the best standard operating procedures, spills can still happen--often when they are least expected.

There is a real opportunity to deliver a better safety experience for people working in risky environments through innovative products. (BW Technologies by Honeywell photo)

Is Passive Passé?

There is a real opportunity to deliver a better safety experience for people working in risky environments through innovative products.

The two DOT agencies are conducting audits, and PHMSA is making unannounced inspections, to ensure railroads

Tank Car Debate Rolls On

While the Association of American Railroads supports requiring older tank cars used to transport flammable liquids to be retrofitted or phased out, many other stakeholders firmly oppose a retrofit.

Head protection that is either too large or too small is inappropriate for use, even if it meets all other requirements.

Tips for Selecting and Maintaining Hard Hats

In the United States, make sure that every hat is permanently marked with "ANSI" on the shell and the suspension so you know it meets or exceeds national standards.

The most important solutions to heat stress are frequent rest and water breaks in the shade.

Beyond OSHA

The most important solutions to heat stress are frequent rest and water breaks in the shade. If laborers work in the sun they absolutely must have tents or shade sails available with cool water and seating.

A staged explosion is used to test a dust collector

Combustible Dust Compliance: Avoiding Common Pitfalls

It takes ongoing vigilance and management of change to identify conditions in your plant that might cause a potential safety problem.

Fiber Cement Company Cited for Workplace Safety Violations

OSHA cites Nichiha USA Inc. for almost $140,000 in proposed safety violation fines.

Misunderstanding the Role of Safety Culture Assessments

Effective culture assessments shouldn’t prompt strategy; they should validate it and, most importantly, improve the success of execution.

New Pig's Forum Gets the Waste Out

The online forum offers many resources to help plants minimize waste and save money through sustainability initiatives, recycling, and lean manufacturing.

You can and should refresh your lockout/tagout program. (ESC Services image)

How to Refresh Your Hazardous Energy Control Program and Make It Last

For any safety manager who wants to see whether his or her company might benefit from a refresh of the existing program, a good first step is to seek out professional assistance to learn more.

Defining correct PPE levels based on electrical hazard risk assessments on all electrical equipment will improve acceptance by electrical workers. (Salisbury by Honeywell photo)

PPE: What You Need When You Need It

Defining the correct PPE levels based on electrical hazard risk assessments on all electrical equipment will lead to better acceptance by electrical workers.

Product Showcase

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

Featured

Artificial Intelligence

Webinars