Articles


Deep-Water Search for MH370 Starting Next Month

Australia's Joint Agency Coordination Centre announced the search will begin in September after ships mapping the sea floor in the new search area complete their survey work.

Attorney General Eric Holder recommends that federal law enforcement personnel who may encounter people experiencing an opioid overdose be trained and equipped with naloxone.

Holder Calls for Federal Law Enforcement Personnel to Carry Naloxone

He urged federal law enforcement agencies to train and equip personnel who may interact with someone overdosing on opioids.

Dexterity needed on the job must be taken into account in glove selection, especially if workers are removing their gloves to complete high-dexterity tasks. (HexArmor photo)

Hand Safety Matters

When you begin a glove trial, it is important to consider as many application-specific issues as possible.

The San Diego Convention Center predicted last December that the center

Southern (California) Charm

One of OSHA's top concerns this year, the safety of temporary workers, is the focus of the Sept. 16 Occupational Keynote.

The facilities/maintenance department is a firsthand witness to many of a facility

Don't Forget the Lab

Accountability is the key, so get everyone involved in housekeeping.

Checking Out VPPPA's Big Show

We'll post reports from the national convention on our website, so be on the lookout during those late August days for items of interest about leadership keynotes and educational sessions.

Hand injuries from chemicals are a leading cause of injury in the cleaning industry.

Proper Use of Disinfectants

Use them sparingly. Many pathogens are becoming immune to some of the disinfectants and sanitizers previously used to eliminate them.

There is no continuous focus from the employers on realistically preparing, supervising, and protecting our workers before entry.

Beware of These Five Common Confined Space Myths

Test your knowledge and recognize the real threats.



Far Ultraviolet (UV-B&C) and Far Infrared (IR-B&C). Exposures at this level can impact the cornea through absorption.

Laser Safety: The Eyes Have It!

Eye injuries are of primary concern. The effect to the eye depends on various factors, including pupil size, pigmentation, laser pulse duration and repetition, and wavelength.

By selecting FR garments that provide protection and comfort, your workers will be more likely to wear them—and wear them appropriately.

FR Garment Comfort: Explaining the Mystery

It is extremely important to consider the three pillars of comfort—heat and moisture management; fabric hand; and garment fit/design—when evaluating your options.

Taking Back Leadership

Perhaps the worker hadn't alerted anyone in the company that he had past back issues. If not, why?

We could point to several mistakes that were made in this case, but the root cause does not belong entirely to the worker.

Lockout/Tagout Accident Investigation

We could point to several mistakes that were made in this case, but the root cause does not belong entirely to the worker.

Explosion at Tonawanda Coke Corp. Brings $161,100 in Fines

Workers allegedly were exposed to preventable fire, chemical and mechanical hazards.

DOT Issues New Rule for Transporting Lithium Batteries

The Pipeline and Hazardous Materials Safety Administration developed the rule, working closely with the Federal Aviation Administration.

As temperatures go up, rates of PPE compliance tend to go down. (CarbonX image)

If You Can't Stand the Heat

As temperatures go up, rates of PPE compliance tend to go down.

HSE

Three Reasons Why Construction Companies Fail When Trying to Predict Injuries

We need to change the mindset these machine-based methodologies must be viewed skeptically or cynically.

Workers Repeatedly Exposed to Amputation Hazards, OSHA Alleges

OSHA proposed fines of $111,650 following inspection at a Packaging Corporation of America facility.

Requirements for proper protective equipment may be overlooked in this booming industry. (Ansell photo)

Addressing Hand Protection Regulations in the Oil and Gas Industry

Requirements for proper protective equipment may be overlooked in this booming industry.

OSHA Issues $14K in Penalties in Fatal Cell Tower Collapse

The fines proposed against S and S Communication Specialists Inc. are the maximum amount possible -- $7,000 per serious violation -- in connection with the collapse of two towers in Clarksburg, W.Va., on Feb. 1, 2014.

Safe Workplaces Executive Order Draws Criticism

The president's Fair Pay and Safe Workplaces order will require that new federal contractors with contracts valued at more than $500,000 disclose labor law violations for the previous three years. The National Association of Manufacturers responded that this is "a dangerous game for our President to be playing with federal contracts."

Product Showcase

  • Safety Shower Test Cart

    The Safety Shower Test Cart speeds up and simplifies emergency shower tests, ensures you stay in compliance with OSHA regulations, and significantly reduces testing costs. With 7 unique features, the cart makes testing easy, effective, and efficient. You can test water clarity, flow, temperature, and spread—all at the same time! Most safety shower testing kits create a mess, take too much time to use, and don't fully help you stay in compliance with OSHA & ANSI standards. Transform the way you test emergency showers with Green Gobbler Safety. Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

Featured

Artificial Intelligence