Articles


Do consider using SMART goals in training program implementation. In addition to SMART goals, stronger training programs may also address a behavior change and/or enhancement and establish behavioral objectives.

Best Practices for Engaging Workers in Health and Safety Training

Provide relevant consequences. Consequences will assist in showing your workers what is in it for them.

Figure 1. Organizations that create a culture of safety by incorporating senior leaders, a facility coordinator, an emergency response team, and the general workforce into their emergency response plans have a much higher rate of success when responding to emergencies.

Is Your Emergency Response Plan a Living System or Just Gathering Dust?

Use these practical tips and best practices to create and maintain an effective emergency response plan. Frequent practice drills are essential.

Many companies incorporate a wear trial into their process for selecting FR apparel. Both Lippert and Zumstein cautioned that a hazard risk assessment is a necessary step to take before conducting a wear trial. (Glen Raven Technical Fabrics, LLC photo)

Lasting Protection

A hazard risk assessment is a necessary step to take before conducting a wear trial. Only when the risk assessment is completed should the customer conduct a wear trial of fabrics that will meet the anticipated energy levels.

The OSHA/NIOSH toolkit contains an appendix that is an editable document any hospital can use to draw up its respiratory protection program.

Essential Precautions for Health Care, General Industry

CDC's Healthcare Infection Control Practices Advisory Committee divides ATDs into those two categories, diseases requiring Airborne Precautions and diseases requiring Droplet Precautions.

CDC's Guideline Is a Much-Needed Start

The National Safety Council put it even more succinctly, so that no one could miss the gravity of this situation: 52 people in America are dying from prescription opioid overdoses every day.

Although the dangers posed by smoke and toxic gases have increased over the years, gas detection devices are keeping pace with new features to protect firefighters and first responders. (Industrial Scientific photo)

Where There's Smoke . . .

Even if we can't stop the production of deadly gases during a fire, we can take precautions to protect ourselves.

Republic Steel Exposed Workers to Hazards Despite Agreement: OSHA

The steel bar manufacturer now faces $121K in fines.

This photo shows some of the first waste being disposed at the WCS Federal Waste Disposal Facility in Andrews, Texas. It opened in June 2013 for disposal of Class A, B and C Low-level Waste and Mixed Low-level Waste, with a licensed capacity of up to 26 million cubic feet. (WCS photo)

Texas Firm Bids for Spent Nuclear Fuel Repository

Waste Control Specialists LLC announced April 28 it has filed an application with the NRC to build and manage a Consolidated Interim Storage Facility.



Statoil Grounds Helicopters After Crash

At least 11 people aboard died in the April 29 crash of a helicopter coming from the Gullfaks B field in the Norwegian North Sea.

OSHA Occupational Safety and Health Committee Schedules Fourth Emergency Response Meeting

The meeting is for the Emergency Response and Preparedness Subcommittee.

OSHA Finds Multiple Hazards After Battery Manufacturer's Worker Loses Part of a Finger

Exide Technologies also received an alert letter for a lack of heat-stress program.

FRA Makes $25 Million Available for Infrastructure Upgrades

The Obama administration has also requested $2.3 billion in the FY2017 budget.

By June 1, 2016, OSHA expects all employers to be fully compliant with GHS adoption.

American Coatings Association Pushing for TSCA Reform Bills

ACA has supported two bills: the Frank R. Lautenberg Chemical Safety for the 21st Century Act, S. 697, which passed the U.S. Senate on Dec. 17, 2015, and a House of Representatives bill, H.R. 2576, which passed June 23, 2015, on a 398-1 vote.

OSHA Cites Berlin Builders Inc. Again for Fall Violations

Nicholas DeJesse, director of the agency's Philadelphia Area Office, said "A developer and contractor that hire this company are truly rolling the dice on worker safety. Amid the hazards we have cited, two Berlin Builders' employees suffered falls in 2015. This employer must make immediate changes before something worse happens."

Convenience Store Where Employed Died in Robbery Cited for Lack of Safety Protections

One willful citation was issued to Jay Management Inc.

Manufacturing Company Cited for Amputation Hazards

Lynar Corp. faces $54,000 in fines.

L&I Honors 84 at Worker's Memorial Day Ceremony

The agency reports that recent data shows construction, agriculture, logging, and jobs that require driving are among the most hazardous jobs for Washington workers, and that falls continue to be a leading cause of workers' deaths. Six work-related deaths in 2015 were homicides.

"It was quite startling to see" the 2014 increase in the U.S. fatality rate for workers 55 and older, with 1,691 occupational deaths in this group, AFL-CIO Director of Safety and Health Peg Seminario said in April 2016.

Older Workers' Risks Highlighted in AFL-CIO's 2016 Report

Other high-risk work groups cited in the report are oil and gas extraction workers (144 deaths in 2014), health care workers who may face workplace violence hazards (765 occupational fatalities in 2014 were attributed to workplace violence), and Latino workers (804 deaths in 2014 and a fatality rate of 3.7 per 100,000 workers).

DOT Agencies Hosting Three Meetings on Sleep Apnea

The public listening sessions will begin May 12 in Washington, D.C., before moving to Chicago and Los Angeles. Stakeholders also may submit written comments until June 8.

NSC Says Workplaces Have Highest Number of Unintentional Deaths Since 2008

The agency has called for a renewed dedication to occupational safety.

Product Showcase

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

Featured

Artificial Intelligence