Articles


An average of 100 aircraft accidents a year occurred in Alaska during the past decade, and about 80 percent of those involved general aviation or non-commercial flights.

NTSB Revisiting Alaska Aviation Safety at Nov. 5 Seminar

From 2011 through September 2016, NTSB investigated 76 general aviation accidents in Alaska involving loss of control in flight that resulted in 31 fatalities and 38 injuries.

MIOSHA Grants Aid 20 Nonprofits

The newly awarded projects address a variety of topics, including crane rigging and signaling; silica safety; masonry; confined space entry; ergonomics; tree trimming and chain saw safety; workplace violence prevention; emergency action plans; hazard communication; lockout/tagout; machine guarding; noise exposure; electrical hazard awareness; PPE; aerial lift rescue; emergency evacuation; safety and health management systems; Hazard Communication; youth safety; and powered industrial trucks.

OSHA Requests Nominations for Advisory Committee on Construction Safety and Health Membership

A meeting has been scheduled for Nov. 30-Dec. 1 in Washington, D.C.

Canadian Government Developing Guidelines for Managing Concussions

"Canadians are asking for and have a growing need for accurate concussion information across the country. This is very important work, and we look forward to continuing to work with the government on raising awareness of concussion treatment," said Pamela Fuselli, interim CEO of Parachute, an injury prevention charity.

Paper Product Manufacturer Cited After Worker Suffers Amputation

The paper product manufacturer was previously cited in 2015 for the same violation

Forum Examines Technology's Role in Crash Prevention

"Human error continues to be the leading cause of the more than 30,000 traffic deaths every year. It is past time for mass use of these life-saving technologies in order to reach zero crashes," said NTSB Board Member Earl Weener, who will lead the Oct. 27 discussion with NSC President and CEO Deborah A.P. Hersman.

IOSH Backs Healthy Workplaces Campaign

The campaign is put on by EU-OSHA.

FDA Awards 21 Grants for Rare Disease Product Development

More than $23 million will be awarded over the next four years. The grants have been award through the Orphan Products Clinical Trials Grants Program.



New CSB Strategic Plan Released

The updated plan lists three strategic goals that include objectives and performance metrics to measure progress.

ANA defines a Culture of Safety as one in which a health care organization

California Nurses Association Welcomes New Workplace Violence Regulations

"This is a landmark day for the entire country, as California has now set the bar with the strongest workplace violence regulation in the nation," said Bonnie Castillo, RN, director of health and safety for CNA/NNU. "Today is a huge victory."

DOL Announces More Than $140 Million in Grants to Train Older Adults

The grants are targeted at older adults that are unemployed or low-income.

There are significant benefits of having healthier employees, both in savings in medical costs and related insurance premium reductions, and in productivity though better well-being and fewer sick days and time off.

New White Paper Highlights Importance of Workplace Wellbeing

The section on incentives reports that institute participants continue to experiment and test the incentive structures to find out what works best for their employees.

Live from NSC Day 3

The final day of the expo focused on the products.

What's Ahead for OSHA, MSHA, DOL in 2017?

We'll know a lot more about the 2017 legislative and regulatory outlook on Nov. 9, 2016, once the presidential election is decided.

First 2017 Campbell Award Deadline Only Three Months Away

The National Safety Council presented the 2016 Robert W. Campbell Award to USG Corporation at this year's annual conference.

When it comes to performing continuous monitoring of a confined space, wireless area monitors offer several advantages. The first benefit is remote monitoring capability. (Industrial Scientific Corporation photo)

Peer-to-Peer Wireless: A Game Changer for Confined Space Monitoring

New advances in gas detection equipment take real-world scenarios to heart and ensure everyone working around confined spaces will know where and why instruments are alarming.

NSC's Next Stop: Indianapolis

The 2017 National Safety Congress & Expo will take place Sept. 23-29 in downtown Indianapolis.

NSC 2016 Day 2 Keynotes Focus on Motivation

Charlie Morecraft and Scott Geller urged their audience to actively care for co-workers and take safety responsibility personally. The afternoon keynote's speakers warned that workplace violence can happen anywhere, so be prepared.

NSC 2016: And the Awards Go to . . .

Lots of awards are handed out during the biggest U.S. safety show of the year.

OSHA's Top Ten Violations for 2016 Announced at NSC

Fall protection was at the top of the list.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence

Webinars